how to identify and fix Honda Accord 9th Generation (2013-2017) brake system issues

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

critical

Severity

4 min read

718 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to identify and fix brake system issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery to ensure safety while working on the brake system
•Ensure the vehicle is on a flat, stable surface and use wheel chocks

Symptoms

•Brake warning light illuminated on the dashboard
•Soft or spongy brake pedal feel
•Grinding or squeaking noises when braking
•Vehicle pulls to one side during braking
•Reduced stopping power or longer stopping distances
•Brake fluid leaks under the vehicle

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Check the brake fluid reservoir to ensure the fluid is at the appropriate level
3
Visually inspect the brake pads for wear and the rotors for grooves or warping
4
Look for any signs of brake fluid leakage along the brake lines and at the calipers
5
Test the brake booster by pressing the brake pedal several times with the engine off, then start the engine
6
Ensure the ABS system is functioning properly by conducting a test on a slippery surface

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Jack and jack stands
•Socket set
•Torque wrench
•Brake pad spreader

Parts Required

•Brake pads
•Brake rotors
•Brake fluid

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using OBD-II scanner
2
Check the brake fluid reservoir to ensure the fluid is at the appropriate level
3
Visually inspect the brake pads for wear and the rotors for grooves or warping
4
Look for any signs of brake fluid leakage along the brake lines and at the calipers
5
Test the brake booster by pressing the brake pedal several times with the engine off, then start the engine
6
Ensure the ABS system is functioning properly by conducting a test on a slippery surface

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is on a flat, stable surface and use wheel chocks.
Disconnect the battery to ensure safety while working on the brake system.

2. Inspect and Replace Brake Pads

Tools Required: Jack and jack stands, socket set, brake pad spreader, torque wrench.
Sub-steps:
1. Lift the vehicle using a jack and secure it with jack stands.
2. Remove the wheel to access the brake assembly.
3. Locate the caliper and remove the bolts securing it to the bracket.
4. Carefully slide the caliper off the rotor and support it with a bungee cord (do not hang by the brake line).
5. Remove the old brake pads and inspect the caliper for damage.
6. Install new brake pads into the caliper bracket.
7. Reinstall the caliper and torque bolts to manufacturer specifications (usually around 20-30 ft-lbs).

3. Replace Brake Rotors (if necessary)

Tools Required: Socket set, torque wrench, rust penetrant.
Sub-steps:
1. If rotors are worn, remove the caliper and pads as previously described.
2. Remove the retaining screws (if applicable) and gently pull off the rotor.
3. Clean the hub surface using a wire brush to remove rust and debris.
4. Install the new rotor, ensuring it sits flat against the hub.
5. Reinstall the caliper and pads as previously described.

4. Bleed the Brake System

Tools Required: Brake bleeder kit, wrench, container.
Sub-steps:
1. Reconnect the brake fluid reservoir cap and ensure it is filled with fresh brake fluid.
2. Start at the wheel farthest from the master cylinder and work towards the closest.
3. Attach the bleeder kit to the bleeder screw on the caliper.
4. Open the bleeder screw and have an assistant press the brake pedal; close the screw before the pedal reaches the floor.
5. Repeat until no air bubbles are seen in the fluid flow.
6. Ensure the fluid level does not drop too low during this process.