how to fix the rear brakes on a Honda Accord 9th Generation (2013-2017)?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

617 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix rear brake issues on a 2013-2017 Honda Accord. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely raised before working underneath it.
•Allow brakes to cool before handling components to avoid burns.

Symptoms

•Reduced braking performance
•Squeaking or grinding noises when braking
•Vibration or pulsation during braking
•Warning light on the dashboard (if equipped)
•Uneven wear on brake pads or rotors

Diagnostic Steps

1
Inspect brake pads for thickness and uneven wear.
2
Check brake rotors for scoring, warping, or excessive wear.
3
Examine brake calipers for proper function and leaks.
4
Inspect brake lines for any signs of damage or leaks.
5
Test brake fluid level and condition.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Torque wrench
•Brake cleaner
•Wire brush
•C-clamp or brake caliper tool

Parts Required

•Brake pads
•Brake rotors (if needed)
•Brake fluid (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts needed.
Ensure the vehicle is parked on a level surface and secure it with wheel chocks.
Wear safety gloves and goggles.

2. Remove Wheel

Tools Required: Jack, jack stands, lug wrench.
Sub-steps:
1. Loosen lug nuts slightly while the vehicle is on the ground.
2. Raise the vehicle using a jack and secure it with jack stands.
3. Remove the lug nuts and take off the wheel.

3. Remove Brake Caliper

Tools Required: Socket set, torque wrench.
Sub-steps:
1. Locate the caliper mounting bolts and remove them.
2. Gently slide the caliper off the rotor; support it with a bungee cord or similar to prevent stress on the brake line.
3. Remove the old brake pads from the caliper bracket.

4. Inspect and Replace Components

Tools Required: Brake cleaner, wire brush.
Sub-steps:
1. Clean the brake rotor with brake cleaner and inspect for damage.
2. If the rotor is worn or damaged, remove it by unscrewing the retaining screws and sliding it off the hub.
3. Replace with a new rotor if necessary.
4. Install new brake pads into the caliper bracket, ensuring they are properly aligned.

5. Reinstall Brake Caliper

Tools Required: Torque wrench.
Sub-steps:
1. Compress the caliper piston using a c-clamp or brake caliper tool to fit over the new pads.
2. Position the caliper over the new pads and rotor.
3. Reinstall caliper mounting bolts and tighten to manufacturer specifications (usually around 25-35 ft-lbs).

6. Reassemble Wheel

Tools Required: Lug wrench.
Sub-steps:
1. Place the wheel back onto the hub.
2. Hand-tighten the lug nuts in a criss-cross pattern.
3. Lower the vehicle and then tighten the lug nuts to the specified torque (typically 80-100 ft-lbs).

7. Test Brake Performance

Sub-steps:
1. Pump the brake pedal several times to ensure proper pressure.
2. Test the brakes at low speed in a safe area to ensure functionality.