how to fix the fuel pump issue in my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

595 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix fuel pump issues in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Fuel System

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always work in a well-ventilated area to avoid inhaling fuel vapors.
•Disconnect the battery before working on any electrical components to prevent shorts.

Symptoms

•Engine cranks but does not start
•Intermittent stalling while driving
•Loss of power during acceleration
•Unusual whining noise from the fuel tank
•Check engine light illuminated

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any fuel system-related codes.
2
Check the fuel pump relay and fuse for continuity and signs of damage.
3
Inspect the fuel lines for leaks or blockages.
4
Measure fuel pressure at the fuel rail using a fuel pressure gauge to ensure it meets manufacturer specifications.
5
Test the fuel pump electrical connector for voltage while the ignition is in the 'ON' position.
6
Listen for the fuel pump operation by turning the ignition key to the 'ON' position without starting the engine.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Socket set
•Screwdrivers
•Torque wrench
•Fuel line disconnect tool

Parts Required

•New fuel pump assembly
•O-ring or gasket (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any fuel system-related codes.
2
Check the fuel pump relay and fuse for continuity and signs of damage.
3
Inspect the fuel lines for leaks or blockages.
4
Measure fuel pressure at the fuel rail using a fuel pressure gauge to ensure it meets manufacturer specifications.
5
Test the fuel pump electrical connector for voltage while the ignition is in the 'ON' position.
6
Listen for the fuel pump operation by turning the ignition key to the 'ON' position without starting the engine.

Solution

1. Preparation

Disconnect the negative battery terminal to avoid electrical shorts.
Relieve fuel system pressure by removing the fuel pump fuse and starting the engine until it stalls.

2. Remove Fuel Pump

Tools Required: Socket set, screwdrivers, fuel line disconnect tool, safety glasses, gloves.
Sub-steps:
1. Remove the rear seat cushion to access the fuel pump access panel.
2. Remove the access panel screws and lift the panel to expose the fuel pump assembly.
3. Disconnect the electrical connector from the fuel pump.
4. Use the fuel line disconnect tool to carefully detach the fuel lines from the pump.
5. Unscrew the retaining ring and lift the fuel pump assembly out of the tank.

3. Inspect and Replace

Inspect the old fuel pump for any visible signs of wear or damage.
If necessary, replace the old fuel pump with a new unit.
- Parts Required: New fuel pump assembly, O-ring or gasket (if applicable).
- Ensure that the replacement pump is compatible with 2013-2017 Honda Accord specifications.

4. Reassemble

Tools Required: Torque wrench, socket set.
Sub-steps:
1. Place the new fuel pump assembly into the tank, ensuring it is seated correctly.
2. Secure the retaining ring to the proper torque specification (consult service manual for exact torque values).
3. Reconnect the fuel lines and electrical connector.
4. Replace the access panel and secure it with screws.
5. Reinstall the rear seat cushion.

5. Final Checks

Reconnect the negative battery terminal.
Reinstall the fuel pump fuse.
Turn the ignition to the "ON" position to prime the fuel system and check for leaks.