how to fix oil consumption issues in Honda Accord 9th Generation (2013-2017)?

Honda Accord Eleventh Generation (2023-present)

Error Codes

4-8 hours

Time

hard

Difficulty

high

Severity

3 min read

542 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Engine

Estimated Time

4-8 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components to avoid burns.

Symptoms

•Engine oil level drops significantly between oil changes
•Blue smoke from the exhaust during acceleration
•Engine misfires or rough idle
•Frequent topping off of engine oil
•Increased engine noise due to low oil levels

Diagnostic Steps

1
Check for engine oil leaks under the vehicle and around the engine components.
2
Perform a compression test to assess the condition of the engine's cylinders.
3
Inspect the PCV (Positive Crankcase Ventilation) system for proper operation.
4
Check the condition and functionality of the oil control rings during an engine tear-down.
5
Scan the vehicle for any OBD-II error codes that may indicate related issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Wrench set
•Pliers
•Torque wrench
•Engine hoist
•Oil catch pan
•Rags

Parts Required

•Replacement PCV valve
•Gasket set for the engine
•Engine oil additive (optional)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check for engine oil leaks under the vehicle and around the engine components.
2
Perform a compression test to assess the condition of the engine's cylinders.
3
Inspect the PCV (Positive Crankcase Ventilation) system for proper operation.
4
Check the condition and functionality of the oil control rings during an engine tear-down.
5
Scan the vehicle for any OBD-II error codes that may indicate related issues.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Park the vehicle on a level surface and ensure the engine is cool.
Disconnect the battery to ensure safety while working.

2. Inspect and Repair Oil Leaks

Tools Required: Socket set, wrench set, oil catch pan, and rags
Inspect the oil pan, valve cover gasket, and seals for leaks.
Tighten any loose bolts and replace any damaged gaskets or seals as necessary.

3. Replace PCV Valve

Tools Required: Pliers and a replacement PCV valve
Locate the PCV valve, typically found on the valve cover.
Remove the old PCV valve by gently twisting and pulling it out using pliers.
Install the new PCV valve, ensuring it fits snugly.

4. Engine Tear-Down for Oil Control Ring Inspection

Tools Required: Socket set, torque wrench, engine hoist (if necessary), and a new gasket set
Remove engine components such as the intake and exhaust manifolds, as per service manual instructions.
Carefully remove the cylinder head to access the pistons.
Inspect oil control rings on each piston for wear or damage; replace if necessary.
Reassemble the engine with new gaskets and torque to manufacturer specifications.

5. Add Engine Oil Additives (Optional)

Tools Required: Engine oil additive
After repairs, consider adding a high-mileage engine oil additive to help rejuvenate seals and improve oil consumption.