how to fix jerking transmission in Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

527 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix jerking transmission issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms and solutions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the engine to cool before opening the transmission pan.
•Disconnect the battery before working on electrical systems.

Symptoms

•Jerking or shuddering during acceleration
•Delayed or harsh shifting between gears
•Transmission slipping or loss of power
•Check engine light illuminated
•Unusual noises from the transmission area

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition (color, smell).
3
Inspect for any visible leaks around the transmission pan and seals.
4
Test the transmission fluid pressure with a gauge to ensure proper pressure.
5
Perform a road test to replicate the jerking condition and observe RPMs and shifting behavior.
6
Check for any loose or damaged mounts that may affect transmission alignment.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Transmission fluid pressure gauge
•Socket set
•Torque wrench
•Drain pan

Parts Required

•Transmission fluid
•Transmission filter
•Transmission mount

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any transmission-related codes.
2
Check the transmission fluid level and condition (color, smell).
3
Inspect for any visible leaks around the transmission pan and seals.
4
Test the transmission fluid pressure with a gauge to ensure proper pressure.
5
Perform a road test to replicate the jerking condition and observe RPMs and shifting behavior.
6
Check for any loose or damaged mounts that may affect transmission alignment.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery before starting work on the electrical components.

2. Check and Replace Transmission Fluid

Sub-steps:
1. Locate the transmission dipstick (if applicable) and remove it.
2. Check the fluid level; if low, add the manufacturer-recommended transmission fluid.
3. If the fluid is dirty (dark brown or burnt smell), drain the old fluid:
  - Place a drain pan under the transmission pan.
  - Remove the pan bolts and gently lower it to drain the fluid.
  - Clean the pan and replace the filter if applicable.
  - Reinstall the pan and refill with new transmission fluid to the appropriate level.

3. Inspect and Replace Transmission Mounts (if necessary)

Sub-steps:
1. Visually inspect all transmission mounts for signs of wear or damage.
2. If damaged, support the transmission with a jack.
3. Remove the bolts securing the damaged mount and replace it with a new one.
4. Reinstall the bolts to the manufacturer’s torque specifications.

4. TCM/PCM Update (if applicable)

Sub-steps:
1. Verify if there are any software updates available for the Transmission Control Module (TCM) or Powertrain Control Module (PCM).
2. If updates are available, use a compatible scan tool to reprogram the TCM/PCM.
3. Follow the on-screen prompts to complete the update.