how to fix Honda Accord 9th Generation (2013-2017) transmission slipping when accelerating

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a level surface and the engine is off.
• Disconnect the battery to avoid electrical shorts.

2. Check and Replace Transmission Fluid

• Sub-steps:

  1. Remove the transmission dipstick and wipe it clean.
  2. Insert the dipstick back and remove it again to check fluid level.
  3. If the fluid is low, add the appropriate Honda ATF-Z1 fluid gradually.
  4. If fluid is dark or has a burnt smell, proceed to replace it.

• Tools Required:

  • Socket set
  • Transmission fluid pump

• Safety Warnings:

  • Ensure the engine is cool before working on the transmission.

3. Inspect and Replace Transmission Filter (if applicable)

• Sub-steps:

  1. Drain the transmission fluid from the pan by removing the drain plug.
  2. Remove the transmission pan; clean the surface and inspect for debris.
  3. Replace the old transmission filter with a new one.
  4. Reinstall the pan with a new gasket and torque to manufacturer specifications.

• Tools Required:

  • Torque wrench
  • Gasket scraper

4. Inspect and Replace Transmission Range Sensor

• Sub-steps:

  1. Locate the transmission range sensor on the transmission.
  2. Disconnect the electrical connector.
  3. Unbolt the sensor and remove it.
  4. Install the new sensor and reconnect the electrical connector.

• Tools Required:

  • Socket set
  • Screwdriver

5. Reconnect Battery and Test Drive

• Reconnect the battery terminals.
• Start the engine and allow it to reach normal operating temperature.
• Test drive the vehicle to ensure the transmission operates smoothly.