how to fix Honda Accord 9th Generation (2013-2017) transmission slipping when accelerating

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

550 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission slipping issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the engine is cool before opening the transmission pan.

Symptoms

•Engine revs without corresponding acceleration
•Delayed or harsh shifting
•Transmission warning light illuminated on the dashboard
•Fluid leaks under the vehicle
•Poor fuel economy

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify potential transmission-related issues.
2
Check the transmission fluid level and condition; look for signs of burning or contamination.
3
Inspect the transmission fluid lines and cooler for leaks or damage.
4
Test the transmission range sensor for proper operation.
5
Perform a road test to assess transmission performance and shifting characteristics.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Transmission funnel
•Fluid pump
•Multimeter

Parts Required

•Honda ATF (Automatic Transmission Fluid)
•Transmission filter (if applicable)
•Transmission solenoids (if required)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify potential transmission-related issues.
2
Check the transmission fluid level and condition; look for signs of burning or contamination.
3
Inspect the transmission fluid lines and cooler for leaks or damage.
4
Test the transmission range sensor for proper operation.
5
Perform a road test to assess transmission performance and shifting characteristics.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is on a level surface and securely lifted with jack stands.
Disconnect the negative battery terminal to prevent electrical shorts.

2. Check and Replace Transmission Fluid

Tools Required: Transmission funnel, fluid pump, torque wrench.
Steps:
1. Locate the transmission dipstick (if applicable) or fill plug.
2. Remove the dipstick or fill plug and check the fluid level.
3. If the fluid is low, add the correct type of Honda ATF (Automatic Transmission Fluid) until it reaches the proper level.
4. If fluid is discolored or burnt, drain the old fluid from the transmission pan using a socket set.
5. Replace the transmission filter if applicable, ensuring to clean the pan and replace the gasket.
6. Refill the transmission with new Honda ATF through the dipstick or fill plug, ensuring proper fluid level.

3. Inspect and Replace Transmission Solenoids (if necessary)

Tools Required: Socket set, torque wrench, multimeter.
Steps:
1. Remove the transmission pan again if it was previously removed.
2. Disconnect the electrical connectors from the solenoids.
3. Test the solenoids with a multimeter for proper resistance.
4. If solenoids are faulty, remove them and replace with new ones, ensuring they are properly seated.
5. Reinstall the transmission pan and torque bolts to the manufacturer's specifications.

4. Reset the Transmission Control Module (TCM)

Tools Required: OBD-II scanner.
Steps:
1. Reconnect the battery terminal.
2. Use an OBD-II scanner to reset any transmission-related error codes.
3. Clear the adaptations stored in the TCM, allowing it to relearn shifting patterns.