how to fix Honda Accord 9th Generation (2013-2017) that jerks when shifting gears

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

576 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix transmission jerking issues in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Transmission

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the engine to cool before checking or changing the transmission fluid.

Symptoms

•Jerking or lurching sensation during gear shifts
•Delayed engagement when shifting into drive or reverse
•Unusual noise during gear changes
•Engine RPMs fluctuating unexpectedly
•Check engine light may be illuminated

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes related to the transmission or engine.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for metal shavings or debris.
4
Test the transmission control module for proper operation.
5
Verify that all electrical connections to the transmission are secure and free of corrosion.
6
Check for any vacuum leaks or issues with the throttle body that may affect shifting.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Transmission fluid pump
•Fluid catch pan
•Multimeter

Parts Required

•Honda ATF-Z1 or DW-1 transmission fluid
•Transmission filter (if applicable)
•Filter gasket

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's OBD-II system for any error codes related to the transmission or engine.
2
Check the transmission fluid level and condition (color and smell).
3
Inspect the transmission fluid for metal shavings or debris.
4
Test the transmission control module for proper operation.
5
Verify that all electrical connections to the transmission are secure and free of corrosion.
6
Check for any vacuum leaks or issues with the throttle body that may affect shifting.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a level surface and secure it with wheel chocks.
Disconnect the battery to prevent electrical shorts.

2. Fluid Change

Tools Required: Transmission fluid pump, socket set, fluid catch pan, funnel.
Sub-steps:
1. Place the fluid catch pan under the transmission sump.
2. Remove the transmission fluid drain plug and allow fluid to drain completely.
3. Replace the drain plug and torque it to the manufacturer’s specifications (typically around 30 ft-lbs).
4. Refill the transmission with the recommended fluid type (Honda ATF-Z1 or DW-1).
5. Start the engine and shift through all gears to circulate the new fluid, then check the level with the dipstick and add more fluid if necessary.

3. Inspect and Replace Transmission Filter (if applicable)

Tools Required: Socket set, gasket scraper, new transmission filter, new filter gasket.
Sub-steps:
1. Remove the transmission pan by unscrewing the bolts and gently scraping off the old gasket material.
2. Carefully remove the old transmission filter.
3. Install the new filter, ensuring it is seated properly.
4. Clean the transmission pan and install a new gasket.
5. Reattach the pan and torque the bolts evenly to specifications.

4. Electrical System Check

Tools Required: Multimeter.
Sub-steps:
1. Reconnect the battery and turn the ignition on without starting the engine.
2. Use the multimeter to check the voltage and ground at the transmission control module (TCM) connectors.
3. Repair or replace any faulty connections or wiring found.

5. Test Drive

Take the vehicle for a test drive to ensure the jerking issue has been resolved. Monitor for any unusual behavior during shifting.