how to fix Honda Accord 9th Generation (2013-2017) oil consumption problems

Honda Accord Eleventh Generation (2023-present)

Error Codes

4-8 hours

Time

hard

Difficulty

high

Severity

3 min read

586 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix excessive oil consumption in Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostics, and repair instructions.

Affected Component

Engine

Estimated Time

4-8 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Allow the engine to cool before opening any components.

Symptoms

•Check engine light illuminated
•Oil warning light activated
•Increased exhaust smoke, especially during acceleration
•Noticeable engine noise or knocking
•Frequent need for oil top-ups
•Poor fuel economy

Diagnostic Steps

1
Check the engine oil level using the dipstick and note the frequency of oil changes.
2
Scan the vehicle's onboard computer for any error codes related to the engine or oil system.
3
Inspect for external oil leaks around the engine, oil pan, and gaskets.
4
Perform a compression test on the engine cylinders to check for wear.
5
Conduct a visual inspection for worn piston rings and valve seals by removing the spark plugs.
6
Check the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Engine hoist
•Piston ring compressor
•Valve spring compressor
•Pliers

Parts Required

•Piston rings
•Valve seals
•PCV valve
•Engine oil and oil filter

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the engine oil level using the dipstick and note the frequency of oil changes.
2
Scan the vehicle's onboard computer for any error codes related to the engine or oil system.
3
Inspect for external oil leaks around the engine, oil pan, and gaskets.
4
Perform a compression test on the engine cylinders to check for wear.
5
Conduct a visual inspection for worn piston rings and valve seals by removing the spark plugs.
6
Check the PCV (Positive Crankcase Ventilation) system for blockages or malfunctions.

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a level surface and the engine is cool.
Disconnect the battery to prevent any electrical issues.

2. Replace Piston Rings

Tools Required: Socket set, torque wrench, piston ring compressor, engine hoist.
Sub-steps:
1. Remove the engine from the vehicle using the engine hoist.
2. Remove the oil pan and cylinder head.
3. Remove the pistons by detaching them from the connecting rods.
4. Replace the old piston rings with new ones using a piston ring compressor.
5. Reassemble the pistons back into the engine and torque them to the manufacturer’s specifications.

3. Replace Valve Seals

Tools Required: Valve spring compressor, socket set, torque wrench.
Sub-steps:
1. Remove the cylinder head from the engine block.
2. Use a valve spring compressor to remove the springs and retainers.
3. Replace the old valve seals with new ones.
4. Reassemble the valve springs and retainers, ensuring they are secured properly.

4. Repair or Replace PCV Valve

Tools Required: Pliers, socket set.
Sub-steps:
1. Locate the PCV valve, typically found on the valve cover.
2. Remove the old PCV valve by detaching the hose and unscrewing it.
3. Install the new PCV valve and ensure all connections are secure.

5. Reassemble Engine Components

Tools Required: Socket set, torque wrench.
Sub-steps:
1. Reinstall the cylinder head and torque it to the manufacturer's specifications.
2. Reinstall the oil pan and ensure a proper seal.
3. Reconnect the battery.