how to fix Honda Accord 9th Generation (2013-2017) ABS light on

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

636 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the ABS light issue on Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely supported before working underneath.

Symptoms

•ABS warning light illuminated on the dashboard
•Increased stopping distance during braking
•Brake pedal feels soft or spongy
•Occasional activation of ABS during normal braking
•Diagnostic trouble codes (DTCs) related to ABS may be stored

Diagnostic Steps

1
Scan the vehicle’s onboard computer using an OBD-II scanner to retrieve any error codes related to the ABS system.
2
Inspect the ABS fuses in the fuse box for any blown fuses and replace if necessary.
3
Check the ABS wheel speed sensors for damage, dirt, or loose connections.
4
Inspect the wiring harnesses and connectors for signs of corrosion or damage.
5
Test the ABS pump and module for functionality using a multimeter.
6
Verify brake fluid level and inspect for any leaks in the brake lines or master cylinder.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Multimeter
•Needle-nose pliers
•Fuse puller

Parts Required

•Replacement ABS fuses (if blown)
•ABS wheel speed sensors (if faulty)
•ABS control module (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle’s onboard computer using an OBD-II scanner to retrieve any error codes related to the ABS system.
2
Inspect the ABS fuses in the fuse box for any blown fuses and replace if necessary.
3
Check the ABS wheel speed sensors for damage, dirt, or loose connections.
4
Inspect the wiring harnesses and connectors for signs of corrosion or damage.
5
Test the ABS pump and module for functionality using a multimeter.
6
Verify brake fluid level and inspect for any leaks in the brake lines or master cylinder.

Solution

1. Preparation

Gather necessary tools and components.
Disconnect the negative battery terminal to prevent electrical shorts.
Ensure the vehicle is on a level surface and secure it with wheel chocks.

2. Inspect ABS Wheel Speed Sensors

Tools Required: Socket set, multimeter
Locate each wheel speed sensor (usually near the brake rotor).
Remove the sensor mounting bolts using a socket.
Disconnect the electrical connector from the sensor.
Use a multimeter to test the sensor's resistance; refer to the service manual for specific resistance values.
Clean any dirt or debris from around the sensor mounting area before reinstalling.

3. Inspect and Replace ABS Fuses

Tools Required: Fuse puller or needle-nose pliers
Locate the fuse box and identify the ABS fuse (refer to the diagram on the fuse box cover).
Remove the fuse and inspect it; replace it if blown with a fuse of the same amperage.
Reconnect the fuse box cover.

4. Repair Wiring and Connectors

Tools Required: Wire strippers, electrical tape, soldering iron (if necessary)
Inspect the wiring harnesses leading to the ABS module and sensors for any visible damage.
Repair any frayed wires or corroded connectors using solder and electrical tape or replace the damaged sections of wiring.
Ensure all connectors are seated securely.

5. Test ABS Pump and Module

Tools Required: Multimeter, diagnostic scan tool
Reconnect the battery terminal.
Turn on the ignition without starting the engine.
Use the diagnostic scan tool to activate the ABS pump and check for any fault codes.
If the module is unresponsive, consider replacing the ABS control module.

6. Final Steps

Refill brake fluid if necessary and bleed the brake system to ensure no air is trapped.
Reconnect all components and ensure everything is secure.
Perform a test drive to verify the ABS system functions correctly.