how to fix grinding brakes on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

4 min read

635 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding brakes on Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow the brakes to cool before performing any work to avoid burns.

Symptoms

•Grinding noise when brakes are applied
•Vibration or pulsation in the brake pedal
•Reduced braking performance
•Brake warning light illuminated
•Increased stopping distance

Diagnostic Steps

1
Inspect brake pads for wear and tear using a visual inspection.
2
Check the brake rotors for scoring, warping, or excessive wear.
3
Examine brake calipers for proper functioning and any signs of fluid leakage.
4
Assess brake fluid level and condition in the master cylinder.
5
Test drive the vehicle to confirm the presence of grinding noise under braking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Torque wrench
•Brake cleaner
•Wire brush
•Safety goggles

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and tear using a visual inspection.
2
Check the brake rotors for scoring, warping, or excessive wear.
3
Examine brake calipers for proper functioning and any signs of fluid leakage.
4
Assess brake fluid level and condition in the master cylinder.
5
Test drive the vehicle to confirm the presence of grinding noise under braking.

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, socket set, torque wrench, brake cleaner, wire brush, and safety goggles.
Ensure the vehicle is parked on a flat surface and the parking brake is engaged.

2. Remove Wheel

Loosen the lug nuts with a lug wrench.
Lift the vehicle using a jack and secure it with jack stands.
Remove the wheel to access the brake assembly.

3. Inspect and Replace Brake Pads

Sub-steps:
- Remove the caliper bolts using a socket wrench and carefully slide the caliper off the rotor.
- Use a wire brush to clean the caliper and bracket of any debris or rust.
- Remove the old brake pads from the caliper bracket.
- Measure the thickness of the old brake pads. If they are below manufacturer specifications, replace them with new pads.
- Apply brake grease to the backing of the new pads to prevent noise.
Safety Warning: Do not allow the caliper to hang by the brake line; support it with a bungee cord if needed.

4. Inspect and Replace Brake Rotors (if necessary)

Sub-steps:
- Check the rotors for grooves or warping. If they are scored or below minimum thickness, they need replacement.
- Remove the caliper bracket bolts and slide off the bracket.
- Remove the rotor by pulling it straight off the hub. If it is stuck, tap it gently with a rubber mallet.
- Install the new rotor by aligning it with the hub and securing it in place.
Torque Specifications: Refer to the manufacturer’s specifications for proper torque values when reinstalling components.

5. Reassemble Brake Assembly

Sub-steps:
- Reinstall the caliper bracket and torque the bolts to the specified values.
- Slide the caliper over the new brake pads and secure it with the caliper bolts.
- Reinstall the wheel and hand-tighten the lug nuts.

6. Lower Vehicle and Test Brakes

Lower the vehicle and remove the jack stands.
Tighten the lug nuts with a torque wrench to the recommended specifications.
Pump the brake pedal several times to ensure proper pad alignment and brake engagement.