how to fix grinding brakes on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

568 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding brakes on Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, tools, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely lifted and supported before working underneath.
•Always wear appropriate personal protective equipment (PPE) when handling brake components.

Symptoms

•Grinding noise when brakes are applied
•Vibration during braking
•Reduced braking efficiency
•Warning light on the dashboard (if applicable)
•Brake pedal feels spongy or unresponsive

Diagnostic Steps

1
Inspect brake pads for wear indicators and damage.
2
Check brake rotors for scoring, warping, or surface damage.
3
Examine brake calipers for proper operation and leaks.
4
Verify brake fluid level and condition.
5
Check for debris or contamination on brake components.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Torque wrench
•Brake cleaner
•Rubber mallet

Parts Required

•Brake pads
•Brake rotors (if needed)
•Brake fluid (if topping off)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Safety: Wear gloves and safety glasses.

2. Remove Wheel

Use a jack to lift the vehicle and secure it with jack stands.
Remove the lug nuts using a socket wrench and take off the wheel.

3. Inspect and Replace Brake Pads

Inspect Brake Pads:
- Check the thickness of the pads. If they are less than 3mm, they should be replaced.
Remove Brake Caliper:
- Use a socket wrench to remove the caliper mounting bolts.
- Gently slide the caliper off the rotor. Do not let it hang by the brake line.
Replace Brake Pads:
- Remove the old pads from the caliper bracket.
- Install new pads into the caliper bracket. Ensure they are positioned correctly.

4. Inspect and Replace Brake Rotors (if necessary)

Check Rotor Condition:
- If rotors are warped or scored, they need to be replaced or resurfaced.
Remove Rotor:
- Remove the caliper bracket (if applicable) by loosening the bolts.
- Slide the rotor off the hub. If it is stuck, use a rubber mallet to tap it loose.
Install New Rotor:
- Place the new rotor onto the hub. Ensure it sits flush.

5. Reassemble Brake Components

Reinstall Caliper:
- Slide the caliper over the new pads and rotor.
- Tighten the caliper mounting bolts to the manufacturer’s torque specifications (typically around 20-30 lb-ft).
Reattach Wheel:
- Place the wheel back on and hand-tighten the lug nuts.
- Lower the vehicle and fully tighten the lug nuts in a crisscross pattern to the specified torque (typically around 80-100 lb-ft).

6. Final Checks

Pump the brake pedal a few times to ensure the caliper pistons are seated properly.
Check brake fluid level and top off if necessary.