how to fix a sticking brake caliper on Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

571 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix a sticking brake caliper on Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, tools, and procedures.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on the braking system.
•Allow the vehicle to cool before handling brake components to avoid burns.

Symptoms

•Brake pedal feels stiff or unresponsive
•Vehicle pulls to one side during braking
•Increased heat and odor from the wheel area
•Uneven wear on brake pads
•Grinding noise when brakes are applied
•Brake warning light illuminated on the dashboard

Diagnostic Steps

1
Inspect the brake caliper visually for signs of corrosion or damage.
2
Check the brake fluid level and condition in the master cylinder.
3
Verify the operation of the brake pedal and listen for any unusual noises.
4
Remove the wheel and inspect the brake pads for uneven wear.
5
Check the caliper slider pins for proper lubrication and movement.
6
Test the caliper piston by applying and releasing brake pressure.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Brake cleaner
•Caliper tool
•Socket set
•Torque wrench
•Gloves
•Safety glasses

Parts Required

•Brake pads (if worn)
•Caliper slider pin grease (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the brake caliper visually for signs of corrosion or damage.
2
Check the brake fluid level and condition in the master cylinder.
3
Verify the operation of the brake pedal and listen for any unusual noises.
4
Remove the wheel and inspect the brake pads for uneven wear.
5
Check the caliper slider pins for proper lubrication and movement.
6
Test the caliper piston by applying and releasing brake pressure.

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, brake cleaner, caliper tool, socket set, torque wrench, gloves, safety glasses.
Raise the vehicle using a jack and secure it with jack stands. Remove the wheel using a lug wrench.

2. Remove the Brake Caliper

Sub-steps:
1. Use a socket set to remove the caliper mounting bolts.
2. Carefully slide the caliper off the rotor and support it with a bungee cord or wire hanger to avoid straining the brake line.
3. Remove the brake pads from the caliper by sliding them out.

3. Inspect and Clean Components

Sub-steps:
1. Inspect the caliper for damage or leaks; replace if necessary.
2. Clean the caliper housing, piston, and brake pads with brake cleaner.
3. Check the caliper slider pins; if they are stuck, remove them and clean using brake cleaner and a wire brush.

4. Lubricate and Reassemble

Sub-steps:
1. Apply a thin layer of high-temperature brake grease to the caliper slider pins and the back of the brake pads.
2. Reinstall the brake pads into the caliper.
3. Reattach the caliper over the rotor and secure it with the mounting bolts, tightening to the manufacturer's specified torque (usually around 25-30 ft-lbs).

5. Final Checks

Sub-steps:
1. Reinstall the wheel and lower the vehicle.
2. Pump the brake pedal several times to reposition the caliper piston.
3. Check the brake fluid level and top off if necessary.