FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix a Honda Accord 9th Generation (2013-2017) that won't start after filling gas - Honda Accord
Home/Cars/Honda/Accord/Eleventh Generation (2023-present)/how to fix a Honda Accord 9th Generation (2013-2017) that won't start after filling gas

how to fix a Honda Accord 9th Generation (2013-2017) that won't start after filling gas

Honda Accord Eleventh Generation (2023-present)

Error Codes
2-4 hours
Time
medium
Difficulty
high
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
534 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix starting issues after refueling in Honda Accord 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Fuel System
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Work in a well-ventilated area to avoid inhaling fuel vapors

Symptoms

  • •Engine cranks but does not start
  • •Fuel gauge indicates full tank
  • •Check engine light illuminated
  • •Possible fuel odor near the vehicle
  • •Difficulty in starting after refueling, especially after filling the tank to the brim

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Multimeter
  • •Fuel pressure gauge
  • •Smoke machine (for leak testing)

Parts Required

  • •Fuel pump (if needed)
  • •Fuel injectors (if faulty)
  • •EVAP components (if damaged)

Additional Information

Affected Component
Fuel System
Estimated Time
2-4 hours
Difficulty
medium
Severity
high
Tools Required
4 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is off.
  • Disconnect the negative battery terminal to prevent electrical shorts.
2. Check Fuel Pump Operation
  • Sub-steps:
    1. Reconnect the battery.
    2. Turn the ignition key to the "ON" position (do not start the engine) and listen for the fuel pump priming sound.
    3. If no sound is heard, use a multimeter to test the fuel pump relay.
  • Tools Required: Multimeter, OBD-II scanner.
3. Inspect and Test Fuel Pressure
  • Sub-steps:
    1. Connect a fuel pressure gauge to the fuel rail service port.
    2. Turn the ignition to the "ON" position and record the pressure reading.
    3. Compare the reading to the manufacturer's specifications (typically around 40-50 psi for Honda Accords).
    4. If the pressure is low, replace the fuel pump.
  • Tools Required: Fuel pressure gauge.
4. Inspect EVAP System
  • Sub-steps:
    1. Locate the EVAP canister and inspect for cracks or damage.
    2. Check the EVAP lines for blockages or leaks.
    3. Use a smoke machine to detect leaks in the EVAP system.
    4. Replace any damaged components.
  • Tools Required: Smoke machine (for leak testing).
5. Check Fuel Injectors
  • Sub-steps:
    1. Disconnect the fuel injector connectors.
    2. Use a multimeter to check the resistance of each injector (should be within specifications).
    3. If any injector is faulty, replace it.
  • Tools Required: Multimeter.