how to diagnose and fix a Honda Accord 9th Generation (2013-2017) with no sound from the speakers?

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

603 words

Problem Statement

Learn how to diagnose and fix no sound from speakers in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to prevent shocks or short circuits
•Allow the vehicle to cool before handling components near the engine

Symptoms

•No sound from speakers
•Audio source may appear to be playing (e.g., radio, CD, Bluetooth)
•Volume control may not affect output
•Display may show audio settings but no sound output
•Possible error messages on infotainment screen

Diagnostic Steps

1
Check audio source by testing with multiple sources
2
Inspect volume settings to ensure volume is turned up and not muted
3
Perform a soft reset by restarting the audio system
4
Scan for error codes using an OBD-II scanner
5
Check fuses in the fuse box for any blown fuses
6
Inspect wiring and connectors behind the head unit and at the speaker locations

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Pliers
•Fuse puller
•Electrical tape

Parts Required

•Replacement fuses
•Replacement speakers

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check audio source by testing with multiple sources
2
Inspect volume settings to ensure volume is turned up and not muted
3
Perform a soft reset by restarting the audio system
4
Scan for error codes using an OBD-II scanner
5
Check fuses in the fuse box for any blown fuses
6
Inspect wiring and connectors behind the head unit and at the speaker locations

Solution

1. Preparation

Gather tools needed for the repair.
Disconnect the vehicle's battery to ensure safety while working on electrical components.

2. Check and Replace Fuses

Locate the fuse box (usually under the dashboard or in the engine compartment).
Identify the audio system fuse using the diagram on the fuse box cover.
Remove the fuse using a fuse puller or pliers.
Inspect the fuse for continuity. If blown, replace it with a fuse of the same amperage rating.

3. Inspect and Repair Wiring

Remove the head unit from the dashboard by unscrewing the mounting screws.
Disconnect the wiring harness from the head unit.
Check for any damaged wires or loose connections.
Repair any damaged wires using electrical tape or by soldering new wire sections.
Reconnect the wiring harness and reassemble the head unit.

4. Test the Speakers

Remove the door panels or speaker covers to access the speakers.
Connect a multimeter to the speaker terminals to check for continuity.
If the speakers are found to be faulty, remove and replace them with new units.
Reassemble the door panels or speaker covers after confirming proper speaker function.

5. Reconnect Battery and Test

Reconnect the vehicle's battery.
Turn on the audio system to test for sound output from the speakers.

Tools Required:

OBD-II scanner
Multimeter
Screwdriver set
Pliers
Fuse puller
Electrical tape

Parts Required:

Replacement fuses (if blown)
Replacement speakers (if faulty)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Disconnect the battery before working on electrical systems to prevent shocks or short circuits.
Allow the vehicle to cool before handling components near the engine.