how to diagnose a Honda Accord 9th Generation (2013-2017) with poor acceleration

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

548 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix poor acceleration issues in the 2013-2017 Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Engine

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow engine to cool before working on the intake or fuel system.

Symptoms

•Check engine light illuminated
•Engine stalling during acceleration
•Hesitation or lag when pressing the accelerator
•Reduced throttle response
•Increased fuel consumption
•Unusual noises from the engine during acceleration

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the air filter for clogs or damage that may restrict airflow.
3
Check fuel pressure using a fuel pressure gauge to ensure proper fuel delivery.
4
Examine the throttle body for carbon buildup or malfunction.
5
Test the operation of the mass airflow (MAF) sensor using a multimeter.
6
Verify the condition of spark plugs and ignition coils for proper function.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Fuel pressure gauge
•Socket set
•Throttle body cleaner
•Multimeter
•Torque wrench

Parts Required

•Air filter
•Throttle body gasket (if required)
•Fuel pump (if needed)
•Spark plugs

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes.
2
Inspect the air filter for clogs or damage that may restrict airflow.
3
Check fuel pressure using a fuel pressure gauge to ensure proper fuel delivery.
4
Examine the throttle body for carbon buildup or malfunction.
5
Test the operation of the mass airflow (MAF) sensor using a multimeter.
6
Verify the condition of spark plugs and ignition coils for proper function.

Solution

1. Preparation

Gather tools and parts required for the repair.
Disconnect the battery to ensure safety during work.

2. Clean or Replace Air Filter

Remove the air filter housing cover using a socket set.
Inspect the air filter; if dirty or damaged, replace it with a new filter.
Reassemble the air filter housing cover and ensure it is securely fastened.

3. Clean Throttle Body

Remove the throttle body from the intake manifold by disconnecting the throttle position sensor connector and unscrewing the mounting bolts.
Use throttle body cleaner and a soft brush to clean the throttle plate and surrounding areas.
Reinstall the throttle body, ensuring the gasket is correctly placed, and torque the bolts to the manufacturer’s specification.

4. Test and Replace Fuel Pump (if necessary)

Connect a fuel pressure gauge to the fuel rail.
Turn the ignition to the ON position without starting the engine; check if fuel pressure meets specifications (typically around 40-50 psi).
If pressure is low, replace the fuel pump. To do this, remove the rear seat to access the fuel pump assembly, disconnect the wiring and fuel lines, and replace the pump with a new one.

5. Inspect and Replace Spark Plugs

Remove the ignition coil covers and disconnect the ignition coils.
Remove the spark plugs using a spark plug socket and inspect for wear or fouling.
Replace with OEM spark plugs, torque to the manufacturer’s specifications, and reassemble the ignition coils.