how to check Honda Accord 9th Generation (2013-2017) tire pressure monitoring system?

Honda Accord Eleventh Generation (2023-present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

497 words

Problem Statement

Learn how to check and reset the TPMS in a Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic steps and tools required.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always work on a vehicle parked on a flat, stable surface.
•Use jack stands to support the vehicle securely when lifted.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inaccurate tire pressure readings
•Warning message displayed on the dashboard
•Tires appearing under-inflated or over-inflated when checked manually
•Difficulty resetting TPMS after tire maintenance

Diagnostic Steps

1
Check the TPMS warning light status on the dashboard.
2
Manually measure tire pressure using a tire pressure gauge.
3
Verify that all tires, including the spare (if equipped with TPMS), are within the recommended pressure range.
4
Inspect tire valve stems for any damage or leaks.
5
Use an OBD-II scanner to check for any stored TPMS error codes.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Tire pressure gauge
•OBD-II scanner
•Portable air compressor

Parts Required

•TPMS sensors (if faulty)
•Valve stems (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the TPMS warning light status on the dashboard.
2
Manually measure tire pressure using a tire pressure gauge.
3
Verify that all tires, including the spare (if equipped with TPMS), are within the recommended pressure range.
4
Inspect tire valve stems for any damage or leaks.
5
Use an OBD-II scanner to check for any stored TPMS error codes.

Solution

1. Preparation

Gather tools: tire pressure gauge, OBD-II scanner, and possibly a portable air compressor.
Ensure the vehicle is parked on a level surface and the tires are cold for accurate pressure readings.

2. Check Tire Pressure

Remove the valve stem cap from each tire.
Press the tire pressure gauge onto the valve stem firmly to get a reading.
Record the pressure for each tire.
Compare the readings with the recommended tire pressure (found on the driver’s side door jamb).

3. Inspect TPMS Sensors

If the tire pressure is correct but the TPMS light remains illuminated:
- Raise the vehicle using a jack and secure it with jack stands.
- Remove the tire from the wheel if necessary to access the TPMS sensor.
- Inspect the sensor for any visible damage or corrosion.

4. Resetting TPMS

Turn the ignition to the "ON" position without starting the engine.
Locate the TPMS reset button (usually found under the steering wheel).
Press and hold the reset button until the TPMS light blinks three times, then release it.
Drive the vehicle for at least 10 minutes at speeds over 30 mph to allow the system to recalibrate.