how to change the brake pads on my Honda Accord 9th Generation (2013-2017)

Honda Accord Eleventh Generation (2023-present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

4 min read

681 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Step-by-step guide on how to change brake pads on a 9th Generation Honda Accord (2013-2017). Learn symptoms, diagnostic steps, and safety tips.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath it.
•Allow the brakes to cool before handling any components after driving.

Symptoms

•Squeaking or squealing noise when braking
•Grinding noise when brakes are applied
•Vibration or pulsation in the brake pedal
•Warning light illuminated on the dashboard
•Reduced braking efficiency

Diagnostic Steps

1
Inspect the brake pads visually for wear indicators.
2
Check the thickness of the brake pads using a caliper.
3
Inspect the brake rotors for scoring or damage.
4
Verify the brake fluid level in the master cylinder reservoir.
5
Check the brake lines for any leaks or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Socket set
•Brake cleaner
•C-clamp
•Torque wrench
•Protective gloves
•Safety glasses

Parts Required

•Brake pads (front set)
•Brake rotor (if necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: Jack, jack stands, lug wrench, socket set, brake cleaner, C-clamp, torque wrench, protective gloves, and safety glasses.
Park the vehicle on a level surface, turn off the engine, and engage the parking brake.
Gather all necessary tools and parts.

2. Lift the Vehicle

Loosen the lug nuts on the front wheels slightly (do not remove).
Use a jack to lift the front of the vehicle and secure it with jack stands.
Remove the lug nuts and take off the front wheels.

3. Remove the Brake Caliper

Locate the caliper mounting bolts (usually two bolts on the back of the caliper).
Use a socket set to remove these bolts.
Carefully slide the caliper off the brake rotor. Do not disconnect the brake line; simply rest the caliper on the suspension components or secure it with a wire.

4. Remove Old Brake Pads

Slide the old brake pads out of the caliper bracket. Note their orientation for installation of new pads.
Inspect the caliper bracket for dirt or debris and clean with brake cleaner if necessary.

5. Compress the Caliper Piston

Use a C-clamp to compress the caliper piston back into the caliper housing. Place one side of the clamp on the back of the caliper and the other side on the piston.
Slowly tighten the clamp until the piston is fully retracted.

6. Install New Brake Pads

Insert the new brake pads into the caliper bracket in the same orientation as the old pads.
Ensure that any anti-squeal shims or clips are properly installed with the new pads.

7. Reinstall the Brake Caliper

Carefully position the caliper over the new brake pads and slide it back into place.
Reinstall the caliper mounting bolts and tighten them to the manufacturer's specified torque (typically around 20-25 ft-lbs).

8. Reassemble and Lower the Vehicle

Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle back to the ground and then use the torque wrench to tighten the lug nuts to the specified torque (typically around 80 ft-lbs).

9. Final Checks

Pump the brake pedal several times to ensure proper positioning of the brake pads and caliper piston.
Check the brake fluid level and add fluid if necessary.