how do I reset the TPMS on my Honda Accord 9th Generation (2013-2017)?

Honda Accord Eleventh Generation (2023-present)

Error Codes

30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

424 words

Problem Statement

Learn how to reset the TPMS on your Honda Accord 9th Generation (2013-2017) with this step-by-step guide. Ensure proper tire pressure and safety.

Affected Component

Electrical

Estimated Time

30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is parked on a flat surface before resetting TPMS.
•Do not attempt to reset TPMS while driving.

Symptoms

•TPMS warning light illuminated on the dashboard
•Inconsistent tire pressure readings on the display
•Warning message indicating low tire pressure
•Difficulty in resetting TPMS after tire maintenance

Diagnostic Steps

1
Verify that all tires, including the spare, are inflated to the manufacturer's recommended pressure.
2
Check the TPMS sensor functionality using a TPMS tool or OBD-II scanner.
3
Inspect the vehicle for any tire pressure leaks or damaged sensors.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•TPMS reset tool
•Tire gauge

Parts Required

•TPMS sensors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Ensure all tires are properly inflated to the recommended PSI (found on the driver's side door jamb).
Gather necessary tools: TPMS reset tool (if applicable), tire gauge.

2. Turn On the Ignition

Insert the key into the ignition and turn it to the "ON" position without starting the engine. This will power the electrical systems.

3. Locate the TPMS Reset Button

The TPMS reset button is typically located beneath the steering wheel or near the fuse box. Consult the owner's manual for the exact location if needed.

4. Reset the TPMS

Press and hold the TPMS reset button until the TPMS indicator light blinks three times, then release the button. This indicates that the system is resetting.

5. Start the Engine

Start the vehicle and allow it to run for about 20 minutes. This will enable the TPMS to recalibrate and recognize the new tire pressures.

6. Verify Reset

After driving, check to see if the TPMS warning light has turned off. If it remains illuminated, repeat the reset process or consult a professional.