Honda Accord 9th Generation (2013-2017) shaking when accelerating why

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

494 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord 2013-2017. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the engine to cool before working on the vehicle.
•Use jack stands to support the vehicle securely when working underneath.

Symptoms

•Vehicle shakes or vibrates during acceleration
•Steering wheel may shake or vibrate
•Increased noise from the engine or drivetrain
•Possible loss of power during acceleration
•Uneven tire wear
•Check engine light may illuminate

Diagnostic Steps

1
Inspect tires for uneven wear, proper inflation, and balancing.
2
Check for any visible damage to suspension components (e.g., control arms, bushings).
3
Scan for error codes using an OBD-II scanner to identify any underlying engine issues.
4
Examine the motor and transmission mounts for wear or damage.
5
Perform a wheel alignment check to ensure proper angles.
6
Test drive the vehicle to replicate the shaking and note specific conditions.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Hydraulic jack
•Jack stands
•Tire pressure gauge
•Socket set
•Torque wrench
•Pry bar

Parts Required

•New tires (if needed)
•Suspension components (if damaged)
•Engine/transmission mounts (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tires for uneven wear, proper inflation, and balancing.
2
Check for any visible damage to suspension components (e.g., control arms, bushings).
3
Scan for error codes using an OBD-II scanner to identify any underlying engine issues.
4
Examine the motor and transmission mounts for wear or damage.
5
Perform a wheel alignment check to ensure proper angles.
6
Test drive the vehicle to replicate the shaking and note specific conditions.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Tire Inspection and Balancing

Sub-steps:
- Remove the wheel covers or hubcaps if equipped.
- Inspect each tire for visible damage and measure tire pressure; inflate as needed.
- Have each tire balanced at a tire shop if imbalance is suspected.

3. Suspension Component Inspection

Sub-steps:
- Lift the vehicle using a hydraulic jack and secure it with jack stands.
- Inspect control arms, ball joints, and bushings for wear or damage.
- Replace any damaged components with OEM parts.

4. Check Engine and Transmission Mounts

Sub-steps:
- Visually inspect the engine and transmission mounts for cracks or excessive wear.
- Using a pry bar, check for play in the mounts and replace if necessary.
- Torque new mounts to manufacturer's specifications.

5. Wheel Alignment

Sub-steps:
- Take the vehicle to an alignment shop.
- Ensure the alignment is within manufacturer specifications.
- Make necessary adjustments to camber, toe, and caster angles.