Honda Accord 9th Generation (2013-2017) shakes when I accelerate what’s wrong

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

3 min read

564 words

Problem Statement

Learn how to diagnose and fix shaking during acceleration in Honda Accord 9th Generation. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical systems.
•Ensure the vehicle is securely lifted and supported when working underneath.

Symptoms

•Shaking or vibration felt through the steering wheel during acceleration
•Increased noise from the engine or drivetrain while accelerating
•Steering wheel misalignment or pulling to one side
•Vibration in the seat or floorboard
•Possible check engine light illuminated

Diagnostic Steps

1
Inspect tire condition and balance by visually checking for wear and ensuring proper inflation.
2
Check wheel alignment using an alignment machine to determine if any adjustments are needed.
3
Scan the vehicle for error codes using an OBD-II scanner to identify any underlying issues.
4
Inspect the engine and transmission mounts for signs of wear or damage.
5
Test drive the vehicle to reproduce the shaking and observe at what speed or RPM it occurs.
6
Check the driveshaft and CV joints for any signs of damage or excessive play.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Lug wrench
•Tire balancing machine
•Alignment machine
•Socket set
•Torque wrench
•OBD-II scanner

Parts Required

•Tires (if needed)
•Engine and transmission mounts (if worn)
•CV joints or driveshaft (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect tire condition and balance by visually checking for wear and ensuring proper inflation.
2
Check wheel alignment using an alignment machine to determine if any adjustments are needed.
3
Scan the vehicle for error codes using an OBD-II scanner to identify any underlying issues.
4
Inspect the engine and transmission mounts for signs of wear or damage.
5
Test drive the vehicle to reproduce the shaking and observe at what speed or RPM it occurs.
6
Check the driveshaft and CV joints for any signs of damage or excessive play.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.

2. Tire Inspection and Balancing

Sub-steps:
1. Remove the wheel covers or hubcaps if present.
2. Loosen the lug nuts slightly while the vehicle is on the ground.
3. Lift the vehicle with a jack and secure it with jack stands.
4. Remove the wheels and inspect the tires for uneven wear, bulges, or damage.
5. If tires are worn, replace them with new ones.
6. Balance the wheels using a tire balancing machine.
Tools Required: Jack, jack stands, lug wrench, tire balancing machine.

3. Wheel Alignment

Sub-steps:
1. Take the vehicle to a professional alignment shop.
2. Place the vehicle on the alignment rack.
3. Adjust the camber, caster, and toe settings according to manufacturer specifications.
Tools Required: Alignment machine.

4. Engine and Transmission Mount Inspection

Sub-steps:
1. Visually inspect the mounts for cracks, tears, or excessive wear.
2. If damaged, remove the bolts securing the mounts and replace with new mounts.
3. Torque the new mounts to the manufacturer's specifications.
Tools Required: Socket set, torque wrench.

5. Driveshaft and CV Joint Inspection

Sub-steps:
1. Inspect the driveshaft for dents or bends.
2. Check CV joints for torn boots or excessive play.
3. Replace any damaged components as necessary.
Tools Required: Socket set, replacement parts as needed.