Honda Accord 9th Generation (2013-2017) ABS light is on how can I fix it

Honda Accord Eleventh Generation (2023-present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

440 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix the ABS light issue in Honda Accord 2013-2017. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath.
•Always allow the vehicle's electrical system to discharge before working on it to avoid shorts.

Symptoms

•ABS warning light illuminated on the dashboard
•Increased stopping distance during braking
•Brake pedal feels spongy or unusually firm
•Possible traction control warning light on
•Occasional loss of traction during braking

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to retrieve any stored error codes.
2
Inspect the ABS fuses for any blown fuses related to the ABS system.
3
Check the condition and connection of the ABS wheel speed sensors on each wheel.
4
Examine the ABS pump and module for any visible leaks or damage.
5
Test the ABS sensor signal output using a multimeter to ensure proper function.
6
Verify brake fluid levels and check for contamination in the brake fluid.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Ratchet and socket set
•Torque wrench
•Brake fluid

Parts Required

•ABS fuses (if blown)
•Wheel speed sensors (if faulty)
•ABS pump/module (if defective)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan the vehicle's onboard diagnostics using an OBD-II scanner to retrieve any stored error codes.
2
Inspect the ABS fuses for any blown fuses related to the ABS system.
3
Check the condition and connection of the ABS wheel speed sensors on each wheel.
4
Examine the ABS pump and module for any visible leaks or damage.
5
Test the ABS sensor signal output using a multimeter to ensure proper function.
6
Verify brake fluid levels and check for contamination in the brake fluid.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface, and the ignition is turned off.
Disconnect the battery to prevent electrical shorts.

2. Retrieve Error Codes

Reconnect the battery.
Use an OBD-II scanner to check for ABS-related trouble codes.
Note any codes for reference during repairs.

3. Inspect ABS Components

ABS Fuses:
- Locate the fuse box and check the ABS fuses.
- Replace any blown fuses with the specified amperage.
ABS Wheel Speed Sensors:
- Raise the vehicle using jack stands.
- Inspect each wheel speed sensor for damage or corrosion.
- Clean or replace sensors as necessary.

4. Test and Replace Components

ABS Pump and Module:
- Inspect the ABS pump for leaks or physical damage.
- If faulty, remove the pump using a ratchet and socket, and replace with a new unit.
Sensor Signal Output:
- Connect a multimeter to the ABS sensor terminals.
- Rotate the wheel and check for a consistent voltage signal.
- Replace any faulty sensors as needed.

5. Final Checks

Refill brake fluid if low, using the manufacturer-recommended fluid type.
Reconnect the battery and clear any stored error codes using the OBD-II scanner.

Tools Required:

OBD-II scanner
Multimeter
Ratchet and socket set
Torque wrench
Brake fluid

Parts Required:

ABS fuses (if blown)
Wheel speed sensors (if faulty)
ABS pump/module (if defective)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Ensure the vehicle is securely supported on jack stands before working underneath.
Always allow the vehicle's electrical system to discharge before working on it to avoid shorts.