why is my Honda Accord Eleventh Generation (2023-present) experiencing brake fade

Solution

1. Preparation

• Gather necessary tools and parts.
• Ensure the vehicle is parked on a flat surface and secured with wheel chocks.
• Disconnect the battery to prevent any electrical issues.

2. Replace Brake Pads

1. Lift Vehicle

   • Use a jack to lift the vehicle and secure it with jack stands.
   • Tools required: Jack, jack stands, lug wrench.

2. Remove Wheel

   • Loosen the lug nuts and remove the wheel to access the brake assembly.
   • Tools required: Lug wrench.

3. Remove Caliper

   • Remove the caliper mounting bolts using a socket set.
   • Carefully slide the caliper off the brake rotor.
   • Support the caliper using a bungee cord or wire to prevent strain on the brake line.

4. Replace Brake Pads

   • Remove the old brake pads from the caliper bracket.
   • Install new brake pads, ensuring they are properly seated.

3. Inspect and Replace Brake Rotors (if necessary)

1. Check Rotors

   • Measure rotor thickness using calipers; replace if below the minimum specification.
   • Inspect for warping and scoring.

2. Remove Rotor

   • If necessary, remove the caliper bracket to access the rotor.
   • Remove any retaining screws or clips.

3. Install New Rotor

   • Place the new rotor onto the hub, securing it with screws if applicable.

4. Bleed Brake System

1. Reattach Caliper

   • Reinstall the caliper over the new brake pads and secure it with mounting bolts.

2. Bleed Brakes

   • Use a brake bleeder kit or a helper to bleed the brakes, ensuring there are no air bubbles in the lines.
   • Start from the furthest wheel from the master cylinder.

5. Reassemble and Test

1. Reinstall Wheel

   • Place the wheel back on and hand-tighten the lug nuts.
   • Lower the vehicle and torque the lug nuts to the manufacturer's specifications.

2. Reconnect Battery

   • Reconnect the battery and check for any warning lights.