FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Civic 11th Generation (2022-Present) engine light come on when driving - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/why does my Honda Civic 11th Generation (2022-Present) engine light come on when driving

why does my Honda Civic 11th Generation (2022-Present) engine light come on when driving

Honda Accord 11th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
516 words

Problem Statement

Discover why the engine light is on in your 2022 Honda Civic. Follow our diagnostic steps and solutions to resolve the issue effectively.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Allow engine to cool before opening the hood to prevent burns.

Symptoms

  • •Check engine light illuminated
  • •Possible loss of power during acceleration
  • •Unusual engine noises or vibrations
  • •Decreased fuel efficiency
  • •Engine stalling or rough idling
  • •Increased emissions

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Fuel pressure gauge
  • •Socket set
  • •Torque wrench
  • •Multimeter

Parts Required

  • •Spark plugs
  • •Oxygen sensor
  • •Fuel filter
  • •Fuel injectors

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Park the vehicle on a flat surface and engage the parking brake.
  • Disconnect the negative battery terminal to ensure safety during repairs.
2. Address Error Codes
  • Reconnect the OBD-II scanner and note any error codes.
  • Research the codes to pinpoint the related issues (e.g., faulty sensor, misfire, etc.).
  • Clear the codes and take the vehicle for a test drive to see if they return.
3. Inspect and Replace Faulty Components
  • For Misfire Codes:
    • Remove spark plugs and inspect for wear or damage.
    • Replace spark plugs if necessary (recommended gap: 0.044 in).
  • For Sensor Codes (e.g., O2 sensor, MAF sensor):
    • Disconnect the electrical connector and remove the sensor.
    • Clean the sensor with appropriate cleaner or replace it if faulty.
  • For Fuel System Issues:
    • Check the fuel filter and replace it if clogged.
    • Inspect fuel injectors for proper operation and clean or replace as needed.
4. Reassemble and Test
  • Reconnect any components that were removed or replaced.
  • Reconnect the negative battery terminal.
  • Start the engine and allow it to idle, monitoring for any abnormal sounds or behaviors.