FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
why does my Honda Civic 11th Generation (2022-Present) check engine light keep coming on - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/why does my Honda Civic 11th Generation (2022-Present) check engine light keep coming on

why does my Honda Civic 11th Generation (2022-Present) check engine light keep coming on

Honda Accord 11th Gen (2023-Present)

Error Codes
1-3 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
541 words

Problem Statement

Learn how to diagnose and fix the check engine light issue in your 2022 Honda Civic. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
1-3 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the engine to cool before inspecting or removing engine components.

Symptoms

  • •Check engine light illuminated
  • •Engine running rough or misfiring
  • •Decreased fuel efficiency
  • •Odd noises from the engine (e.g., knocking or pinging)
  • •Strong fuel odor
  • •Engine stalling or reduced power during acceleration

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Multimeter
  • •Screwdriver set

Parts Required

  • •Spark plugs
  • •Ignition coils (if necessary)
  • •Air filter (if necessary)
  • •Gas cap (if damaged)

Additional Information

Affected Component
Engine
Estimated Time
1-3 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather all necessary tools and parts.
  • Ensure the vehicle is parked on a level surface and the engine is cool.
2. Retrieve Error Codes
  • Connect the OBD-II scanner to the vehicle’s diagnostic port.
  • Turn the ignition to the ON position without starting the engine.
  • Select “Read Codes” on the scanner to retrieve and note down any trouble codes.
3. Address Common Issues

A. Gas Cap Inspection

  • Remove the gas cap and inspect for cracks or damage.
  • Clean the sealing surface on the filler neck.
  • Reinstall the gas cap tightly and check for the light reset after a few driving cycles.

B. Spark Plug and Ignition Coil Replacement

  • Remove the engine cover (if applicable) for access.
  • Disconnect the ignition coil connectors.
  • Unscrew and remove the ignition coils.
  • Remove the spark plugs using a spark plug socket.
  • Install new spark plugs (torque to manufacturer specifications, typically 13-15 ft-lbs).
  • Reinstall ignition coils and reconnect connectors.
4. Air Intake Inspection
  • Check the air filter for dirt and debris; replace if necessary.
  • Inspect the intake hoses and connections for leaks or cracks.
  • Replace any damaged hoses and ensure all connections are secure.
5. Battery and Charging System Check
  • Use a multimeter to measure the battery voltage (should be around 12.6V with the engine off).
  • Start the engine and measure the voltage again (should be between 13.7V and 14.7V).
  • Replace the battery or alternator if readings are out of spec.