my Honda Civic 11th Generation (2022-Present) is shaking when I brake what's wrong

Honda Accord 11th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

525 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix brake shaking issues in the 2022 Honda Civic. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before beginning work on the braking system.
•Allow the vehicle to rest on jack stands before working underneath it.

Symptoms

•Steering wheel shakes when braking
•Vehicle pulls to one side during braking
•Brake pedal feels pulsating or vibrating
•Increased stopping distance
•Unusual noises (grinding or squeaking) when brakes are applied

Diagnostic Steps

1
Inspect brake pads for wear and uneven thickness.
2
Check brake rotors for warping or scoring.
3
Examine wheel alignment and tire condition.
4
Inspect suspension components for wear or damage.
5
Scan for any diagnostic trouble codes (DTC) related to the braking system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Torque wrench
•Dial indicator
•Brake cleaner
•Safety glasses
•Gloves

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a flat surface, and engage the parking brake.
Wear safety glasses and gloves.

2. Remove Wheel

Loosen lug nuts on the affected wheel slightly while the vehicle is still on the ground.
Use a jack to lift the vehicle and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect Brake Components

Brake Pads:
- Check for uneven wear; replace if less than 3mm thickness remains.
Brake Rotors:
- Use a dial indicator to measure rotor runout; if warping exceeds manufacturer specifications (often 0.002-0.005 inches), replace rotors.
- If rotors are within specifications, consider resurfacing if there are grooves or scoring.

4. Replace Brake Pads and Rotors (if necessary)

Brake Pads Replacement:
- Remove caliper bolts and slide caliper off the rotor.
- Remove old pads and install new ones, ensuring they are oriented correctly.
Brake Rotor Replacement:
- Remove the caliper bracket if necessary.
- Slide off the old rotor and install the new rotor, ensuring it is seated properly.

5. Reassemble and Torque

Reinstall the caliper over the new pads and secure it with the caliper bolts.
Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle and use a torque wrench to tighten lug nuts to the manufacturer’s specified torque (typically 80-100 ft-lbs).

6. Final Checks

Pump the brake pedal several times to seat the pads against the rotors.
Inspect for any leaks around the brake system.