my Honda Accord has shaking during braking what's causing it

Honda Accord 11th Gen (2023-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

500 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow brake components to cool before handling to avoid burns.
•Ensure the vehicle is securely supported before working underneath it.

Symptoms

•Vibration felt in the steering wheel when braking
•Pulsating sensation in the brake pedal
•Shaking of the vehicle body during braking
•Uneven wear on brake pads or rotors
•Increased stopping distance

Diagnostic Steps

1
Inspect brake rotors for warping or scoring.
2
Check brake pads for wear and proper installation.
3
Examine wheel alignment and tire balance.
4
Inspect suspension components for wear or damage.
5
Test the brake calipers for proper operation and sticking.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket set
•Torque wrench
•Brake cleaner
•Jack and jack stands
•Safety glasses

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and materials: socket set, torque wrench, brake cleaner, and safety glasses.
Ensure the vehicle is parked on a level surface and secured with wheel chocks.
Disconnect the negative battery terminal to avoid any electrical issues.

2. Remove Wheel

Loosen wheel lug nuts slightly before lifting the vehicle.
Use a jack to raise the vehicle and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Components

Brake Rotors:
- Remove caliper bolts using a socket.
- Slide the caliper off the rotor and support it without stress on the brake line.
- Remove the rotor and inspect for warping or scoring; replace if necessary.
- If replacing, install the new rotor ensuring it is properly seated.
Brake Pads:
- Remove the old brake pads from the caliper bracket.
- Inspect the caliper for any issues and replace pads with high-quality replacements.
- Apply brake grease to the backing plates of the new pads and reinstall them.

4. Reassemble and Torque

Reattach the caliper over the new pads and rotor, tightening the caliper bolts to the manufacturer’s specified torque (usually around 20-30 ft-lbs).
Reinstall the wheel and hand-tighten the lug nuts.

5. Lower Vehicle and Final Checks

Lower the vehicle from jack stands and remove wheel chocks.
Tighten the lug nuts to the manufacturer’s torque specification (typically 80-100 ft-lbs).
Reconnect the negative battery terminal.