how to troubleshoot Honda Accord 9th Generation (2013-2017) air conditioner not blowing?

Honda Accord 11th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

633 words

Problem Statement

Learn how to troubleshoot and fix the air conditioning system not blowing in Honda Accord 9th Generation (2013-2017). Step-by-step guide with diagnostic steps.

Affected Component

HVAC

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical components.
•Allow the system to depressurize before servicing the AC system.

Symptoms

•No air flow from the vents
•AC compressor not engaging
•Unusual noises when the AC is turned on
•Air temperature not cooling when AC is activated
•Blower motor not operational
•Dashboard climate control lights not functioning

Diagnostic Steps

1
Check the vehicle's fuse box for blown fuses related to the AC system.
2
Use an OBD-II scanner to check for any trouble codes related to the climate control system.
3
Inspect the blower motor for proper operation by applying direct power to it.
4
Examine the cabin air filter for clogs or restrictions that may impede airflow.
5
Verify the AC refrigerant level to ensure it is not low, which can prevent the system from functioning correctly.
6
Test the AC control module and climate control switches for electrical continuity.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Multimeter
•OBD-II scanner
•Screwdrivers
•Pliers
•Socket set

Parts Required

•Cabin air filter
•Blower motor (if defective)
•AC refrigerant (if low)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the vehicle's fuse box for blown fuses related to the AC system.
2
Use an OBD-II scanner to check for any trouble codes related to the climate control system.
3
Inspect the blower motor for proper operation by applying direct power to it.
4
Examine the cabin air filter for clogs or restrictions that may impede airflow.
5
Verify the AC refrigerant level to ensure it is not low, which can prevent the system from functioning correctly.
6
Test the AC control module and climate control switches for electrical continuity.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the vehicle battery to ensure safety.

Tools Required:

Multimeter
OBD-II scanner
Screwdrivers
Pliers
Socket set

2. Inspect and Replace Fuses

Locate the fuse box under the dashboard and the engine compartment.
Identify the fuses related to the AC system using the fuse diagram.
Remove and inspect each fuse for continuity using a multimeter.
Replace any blown fuses with new ones of the same amperage.

3. Check and Replace the Cabin Air Filter

Open the glove compartment and remove it to access the cabin air filter.
Slide out the old cabin air filter and inspect it for dirt and debris.
Replace it with a new filter, ensuring it is oriented correctly according to the airflow direction.

4. Test and Replace the Blower Motor

Locate the blower motor under the passenger side dashboard.
Disconnect the electrical connector and apply direct power to the blower motor.
If the motor does not operate, replace it with a new blower motor.
Reconnect the electrical connector after installation.

5. Recharge the AC System (if necessary)

Connect a refrigerant gauge set to the AC service ports.
Check the low and high-pressure readings to determine if the system is low on refrigerant.
If low, follow the manufacturer's guidelines to recharge the system with the correct refrigerant type and amount.

6. Verify AC Control Module Functionality

Inspect the wiring harness connected to the AC control module for any signs of damage or corrosion.
Use a multimeter to check for continuity in the wires.
If the module is faulty, replace it according to the manufacturer’s specifications.