how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

385 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2017 Honda Accord. Step-by-step guide to ensure your vehicle is ready for service.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' (if automatic) or neutral (if manual) before turning on the ignition.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible message indicating 'Maintenance Due'
•Reminder notification for oil change or service

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure the odometer display is set to the 'Trip A' setting.
3
Turn the ignition off and then back to the 'ON' position.
4
Press and hold the 'Select/Reset' button on the dashboard.
5
Continue holding the button until the maintenance light begins to blink and then turns off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None required.

Parts Required

•None required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure the odometer display is set to the 'Trip A' setting.
3
Turn the ignition off and then back to the 'ON' position.
4
Press and hold the 'Select/Reset' button on the dashboard.
5
Continue holding the button until the maintenance light begins to blink and then turns off.

Solution

1. Preparation

Gather necessary tools: None required.
Ensure the vehicle is in a safe location with the ignition off.

2. Turn on the Ignition

Insert the key into the ignition and turn it to the "ON" position without starting the engine.

3. Set the Odometer

Use the button on the dashboard to toggle the display to "Trip A." This can be done by pressing the "Select/Reset" button until "Trip A" is displayed.

4. Reset the Maintenance Light

Turn the ignition off.
Turn the ignition back to the "ON" position.
Press and hold the "Select/Reset" button on the dashboard.
Continue holding the button until the maintenance light starts to blink and then turns off, indicating the reset is successful.

5. Final Check

Turn the ignition off and then start the engine to confirm that the maintenance light is no longer illuminated.