how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)?

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

361 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2017 Honda Accord 9th Generation. Step-by-step guide for a quick and easy reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in park (automatic) or neutral (manual) before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Reminder for scheduled maintenance displayed
•No changes in vehicle performance or handling

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure the odometer is displayed on the instrument panel.
3
Press the 'SELECT/RESET' knob until the maintenance message appears, if needed.
4
Turn the ignition off.
5
Press and hold the 'SELECT/RESET' knob while turning the ignition back to the 'ON' position.
6
Release the 'SELECT/RESET' knob when the maintenance light goes out.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Vehicle's ignition key
•Small flathead screwdriver (if needed)

Parts Required

•None required for this procedure.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Ensure the odometer is displayed on the instrument panel.
3
Press the 'SELECT/RESET' knob until the maintenance message appears, if needed.
4
Turn the ignition off.
5
Press and hold the 'SELECT/RESET' knob while turning the ignition back to the 'ON' position.
6
Release the 'SELECT/RESET' knob when the maintenance light goes out.

Solution

1. Preparation

Ensure the vehicle is parked on a level surface.
Gather necessary tools, such as a small flathead screwdriver if needed.

2. Accessing the Maintenance Light Reset

Insert the key into the ignition and turn it to the "ON" position without starting the engine.
Confirm that the odometer is displayed by pressing the "SELECT/RESET" knob, if necessary.

3. Resetting the Maintenance Light

Turn off the ignition.
Press and hold the "SELECT/RESET" knob.
While holding the knob, turn the ignition back to the "ON" position.
Keep holding the knob until the maintenance light flashes and then goes out, indicating a successful reset.

4. Final Check

Turn the ignition off and then back to the "ON" position to verify that the maintenance light is no longer illuminated.