how to reset the maintenance light on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Error Codes

5-10 minutes

Time

easy

Difficulty

low

Severity

2 min read

342 words

Problem Statement

Learn how to reset the maintenance light on a 2013-2017 Honda Accord. Step-by-step guide for quick and easy maintenance light reset.

Affected Component

Electrical

Estimated Time

5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' or 'Neutral' with the parking brake engaged before performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•Possible reminder for oil change or other service due
•No significant vehicle performance issues

Diagnostic Steps

1
Turn the ignition switch to the 'ON' position without starting the engine.
2
Use the trip button on the dashboard to navigate to the 'Oil Life' display.
3
Press and hold the trip button until the oil life resets to 100%.
4
Verify that the maintenance light has turned off.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Ensure the vehicle is parked on a flat surface with the engine off.

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Tools Required: None
Ensure the vehicle is parked on a flat surface with the engine off.

2. Turn on the Ignition

Insert the key into the ignition or press the start button (if equipped with keyless start).
Turn the ignition to the "ON" position without starting the engine.

3. Access the Oil Life Display

Locate the trip button on the dashboard (typically found near the speedometer).
Press the trip button until the "Oil Life" percentage is displayed.

4. Reset the Maintenance Light

Press and hold the trip button for about 10 seconds.
The oil life percentage will begin to blink.
Release the trip button, then press and hold it again until the oil life resets to 100%.

5. Confirm the Reset

Verify that the maintenance light is now off on the dashboard.