FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to reset the maintenance light on Honda Accord 8th Generation (2008-2012) - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/how to reset the maintenance light on Honda Accord 8th Generation (2008-2012)

how to reset the maintenance light on Honda Accord 8th Generation (2008-2012)

Honda Accord 11th Gen (2023-Present)

Error Codes
5-10 minutes
Time
easy
Difficulty
low
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
2 min read
371 words

Problem Statement

Learn how to reset the maintenance light on Honda Accord 8th Generation (2008-2012) with this step-by-step guide. Quick and easy instructions.

Affected Component
Electrical
Estimated Time
5-10 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Ensure the vehicle is in 'Park' mode and on a level surface before beginning the reset process.

Symptoms

  • •Maintenance light illuminated on the dashboard
  • •Reminder for oil change or service displayed on the odometer
  • •No performance issues; light is solely an indicator

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •None required for this process.

Parts Required

  • •None required for this process.

Additional Information

Affected Component
Electrical
Estimated Time
5-10 minutes
Difficulty
easy
Severity
low
Tools Required
1 item
Parts Required
1 item

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Ensure the vehicle is parked in a safe location with the ignition off.
  • Have the vehicle's key within reach.
2. Ignition Position
  • Insert the key into the ignition.
  • Turn the ignition switch to the "ON" position without starting the engine.
3. Access Oil Life Indicator
  • Locate the "Select/Reset" knob on the dashboard.
  • Press the "Select/Reset" knob until the oil life indicator is shown on the display.
4. Reset Oil Life
  • Press and hold the "Select/Reset" knob for about 10 seconds.
  • Observe the oil life indicator blinking; this indicates the reset process has started.
  • Release the knob when the oil life begins to blink.
5. Finalize Reset
  • Press and hold the "Select/Reset" knob again until the oil life resets to 100%.
  • Verify that the maintenance light has turned off.