FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix my Honda Civic 11th Generation (2022-Present) windows won’t go up - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/how to fix my Honda Civic 11th Generation (2022-Present) windows won’t go up

how to fix my Honda Civic 11th Generation (2022-Present) windows won’t go up

Honda Accord 11th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
536 words

Problem Statement

Learn how to diagnose and fix the issue of windows not going up in your 2022 Honda Civic. Step-by-step guide with tools and parts required.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical components.
  • •Allow the vehicle to cool down before working on any engine-related components if necessary.

Symptoms

  • •Windows do not respond when the switch is pressed
  • •Window switch feels loose or has no resistance
  • •No sound from the window motor when the switch is activated
  • •Other windows operate normally
  • •Possible blown fuse or malfunctioning relay

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Socket set
  • •Screwdrivers
  • •Multimeter
  • •Wire connectors
  • •Trim removal tool

Parts Required

  • •Window switch (if faulty)
  • •Window motor (if faulty)
  • •Window regulator (if faulty)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Tools Required: Socket set, screwdrivers, multimeter, wire connectors
  • Disconnect the vehicle battery to ensure safety during repairs.
  • Gather all necessary tools and parts before starting.
2. Inspect the Window Switch
  • Remove the door panel using a screwdriver or trim removal tool.
  • Disconnect the electrical connector from the window switch.
  • Use a multimeter to test for continuity across the switch terminals while pressing the switch.
    • If there is no continuity, replace the window switch.
  • Reconnect the switch and reassemble the door panel.
3. Check the Fuse
  • Locate the fuse box (typically under the dashboard or in the engine compartment).
  • Identify the fuse related to the power windows (refer to the fuse diagram).
  • Remove the fuse and inspect it visually; replace if it is blown.
  • Reinstall the fuse and reconnect the battery.
4. Test the Window Motor
  • Access the window motor by removing any necessary covers or panels.
  • Disconnect the motor from its connector.
  • Using jumper wires, apply direct battery voltage to the motor terminals to see if it operates.
    • If the motor works, further inspection of the wiring or switch is needed.
    • If it does not work, replace the window motor.
5. Inspect Wiring and Regulator
  • Check the wiring harness for damage or frayed wires between the switch and motor.
  • Inspect the window regulator for any obstructions or mechanical failures.
  • If the regulator is faulty, replace it by removing the window glass first, then unbolting the regulator.