FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
how to fix Honda Civic 11th Generation (2022-Present) window not going up - Honda Accord
Home/Cars/Honda/Accord/11th Gen (2023-Present)/how to fix Honda Civic 11th Generation (2022-Present) window not going up

how to fix Honda Civic 11th Generation (2022-Present) window not going up

Honda Accord 11th Gen (2023-Present)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
538 words

Problem Statement

Learn how to diagnose and fix the window not going up in Honda Civic 11th Generation. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component
Electrical
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect battery before working on electrical systems.
  • •Use caution when handling glass components to avoid injury.

Symptoms

  • •Window is stuck in the down position
  • •Window does not respond to the power window switch
  • •No sound or movement from the window motor
  • •Other windows operate normally
  • •Possible blown fuse for the window circuit

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •Multimeter
  • •Screwdrivers (flathead and Phillips)
  • •Trim removal tool
  • •Jumper wires
  • •Pliers

Parts Required

  • •Window fuse (if blown)
  • •Window switch (if defective)
  • •Window motor (if faulty)
  • •Window regulator (if damaged)

Additional Information

Affected Component
Electrical
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
5 items
Parts Required
4 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather necessary tools and parts.
  • Disconnect the vehicle battery to ensure safety while working on electrical components.
2. Inspect and Replace the Fuse
  • Locate the fuse box (typically under the dashboard or in the engine compartment).
  • Remove the cover and find the window fuse using the diagram on the cover.
  • Use a fuse puller or pliers to remove the fuse and inspect it.
  • If blown, replace it with a fuse of the same amperage (typically 20A).
3. Remove and Test the Window Switch
  • Use a flathead screwdriver to gently pry off the window switch panel.
  • Disconnect the electrical connector from the switch.
  • Use a multimeter to test for continuity across the switch terminals while pressing the switch.
  • If defective, replace the switch with a new one.
4. Access and Test the Window Motor
  • Remove the door panel by unscrewing screws and gently prying it off with a trim tool.
  • Locate the window motor and disconnect the electrical connector.
  • Use jumper wires to connect the motor directly to the battery (positive to the positive terminal, negative to the negative terminal) to check if it operates.
  • If the motor does not operate, replace it.
5. Inspect and Replace the Window Regulator
  • If the motor works but the window does not move, the regulator may be faulty.
  • Remove the motor if it’s attached to the regulator (usually requires screws).
  • Disconnect any cables or clips securing the regulator.
  • Remove the regulator from the door and inspect for damage.
  • Install a new window regulator if necessary, following the reverse steps of removal.