how to fix grinding brakes on Honda Accord 9th Generation (2013-2017)

Honda Accord 11th Gen (2023-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

600 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding brakes on Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is on a flat surface and engage the parking brake.
•Wear safety glasses and gloves to protect against debris and chemicals.
•Ensure the vehicle is stable on jack stands before working beneath it.
•Allow components to cool if the vehicle has been driven recently to avoid burns.

Symptoms

•Grinding noise when brakes are applied
•Reduced braking performance
•Vibration in the brake pedal
•Warning light on the dashboard (if equipped)
•Brake dust accumulation on wheels
•Odor of burnt materials (if overheating occurs)

Diagnostic Steps

1
Inspect brake pads for wear and tear visually.
2
Check brake rotors for scoring or damage.
3
Examine brake calipers for sticking or malfunction.
4
Inspect brake fluid levels and quality.
5
Look for any foreign debris or contamination in the braking system.
6
Test brake pedal feel and response during a stationary test.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Brake cleaner
•Torque wrench
•Socket set
•C-clamp or brake caliper tool

Parts Required

•Brake pads
•Brake rotors (if necessary)
•Brake grease

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads for wear and tear visually.
2
Check brake rotors for scoring or damage.
3
Examine brake calipers for sticking or malfunction.
4
Inspect brake fluid levels and quality.
5
Look for any foreign debris or contamination in the braking system.
6
Test brake pedal feel and response during a stationary test.

Solution

1. Preparation

Tools Required:
- Jack and jack stands
- Lug wrench
- Brake cleaner
- Torque wrench
- Socket set
- C-clamp or brake caliper tool
Safety Warnings:
- Ensure the vehicle is on a flat surface and engage the parking brake.
- Wear safety glasses and gloves to protect against debris and chemicals.

2. Remove Wheel

Loosen the lug nuts on the wheel using a lug wrench.
Use a jack to lift the vehicle and securely place it on jack stands.
Fully remove the lug nuts and take off the wheel.

3. Inspect and Remove Brake Components

Inspect Brake Pads:
- Check the thickness of the brake pads; if less than 3mm, replace them.
Remove Brake Caliper:
- Use a socket set to remove the caliper mounting bolts.
- Carefully slide the caliper off the rotor; support it to avoid strain on the brake line.
Remove Brake Pads:
- Slide the old brake pads out of the caliper bracket.
Inspect Brake Rotor:
- Check for any scoring or warping. If damaged, replace the rotor.

4. Install New Brake Components

Install New Brake Pads:
- Apply brake grease to the backing of the new brake pads to prevent squealing.
- Slide the new pads into the caliper bracket.
Reinstall Brake Caliper:
- Compress the caliper using a C-clamp to fit over the new pads.
- Align the caliper and secure it with the mounting bolts. Torque to manufacturer specifications.

5. Reassemble and Test

Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle from the jack stands.
Tighten the lug nuts to the specified torque in a crisscross pattern.
Pump the brake pedal a few times to ensure proper brake pad seating.