why is my Honda Accord making a grinding noise when braking

Honda Accord 10th Generation (2018-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

532 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix grinding noise when braking in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely lifted and supported before working underneath.
•Allow brakes to cool before touching any components.

Symptoms

•Grinding noise when applying brakes
•Vibration in the brake pedal
•Reduced braking performance
•Brake warning light illuminated
•Uneven wear on brake pads

Diagnostic Steps

1
Inspect brake pads for wear and damage.
2
Check brake rotors for scoring or warping.
3
Examine brake calipers for proper operation and fluid leaks.
4
Inspect brake lines for any signs of wear or damage.
5
Test the brake system by performing a visual check of the anti-lock brake system.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Socket wrench
•Jack and jack stands
•Brake cleaner
•Torque wrench
•Brake pad spreader

Parts Required

•Brake pads
•Brake rotors

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and parts.
Ensure the vehicle is parked on a flat surface, and the ignition is off.
Engage the parking brake.

2. Remove Wheel

Loosen the lug nuts using a socket wrench.
Raise the vehicle using a jack and secure it with jack stands.
Completely remove the lug nuts and take off the wheel.

3. Inspect and Replace Brake Pads

Inspect Pads: Check the thickness of the brake pads. If they are less than 1/8 inch, they need to be replaced.
Remove Old Pads: Use a socket wrench to remove the caliper bolts. Carefully slide the caliper off the rotor.
Replace Pads: Remove old pads from the caliper bracket. Install new pads, ensuring they are properly seated.

4. Inspect and Resurface or Replace Rotors

Inspect Rotors: Check for grooves or excessive wear. If they are scored, they may need to be resurfaced or replaced.
Resurfacing: If resurfacing, use a brake lathe to ensure the rotor surface is smooth.
Replacement: If replacing, remove the rotor by removing the retaining screws or caliper bracket if necessary and install the new rotor.

5. Reassemble Components

Reattach Caliper: Slide the caliper back over the new pads and rotor. Tighten the caliper bolts to the manufacturer’s torque specifications (usually around 25-35 lb-ft).
Reinstall Wheel: Place the wheel back on, hand-tighten the lug nuts, lower the vehicle, and then fully tighten the lug nuts in a crisscross pattern to the manufacturer’s specifications (usually around 80-100 lb-ft).

6. Test Brake System

Start the vehicle and pump the brakes several times to ensure the pads seat properly against the rotors.
Check for any unusual noises or issues during the initial test drive.