what does it mean when my Honda Accord makes a clicking noise while turning

Honda Accord 10th Generation (2018-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

561 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix clicking noise while turning in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Suspension

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Disconnect the battery before working on electrical systems.

Symptoms

•Clicking noise when turning the steering wheel
•Noise increases with speed
•Vibration felt in the steering wheel
•Difficulty steering or loose steering feel
•Possible grinding noise in addition to clicking

Diagnostic Steps

1
Inspect the front axle CV joints for wear or damage.
2
Check the wheel bearings for excessive play or damage.
3
Examine the suspension components for wear, including control arms and bushings.
4
Inspect the brake components for any foreign objects or misalignment.
5
Test drive the vehicle to replicate the noise and pinpoint its origin.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack
•Jack stands
•Wheel chocks
•Lug wrench
•Socket wrench
•Bearing puller
•Torque wrench

Parts Required

•CV joint or axle (if damaged)
•Wheel bearings (if worn)
•Suspension components (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the front axle CV joints for wear or damage.
2
Check the wheel bearings for excessive play or damage.
3
Examine the suspension components for wear, including control arms and bushings.
4
Inspect the brake components for any foreign objects or misalignment.
5
Test drive the vehicle to replicate the noise and pinpoint its origin.

Solution

1. Preparation

Gather tools and parts needed.
Ensure the vehicle is parked on a flat surface and engage the parking brake.
Disconnect the battery if working on electrical components.

2. Inspect and Replace CV Joints

Raise the Vehicle
- Use a jack to lift the front of the car and secure it with jack stands.
- Tools Required: Jack, jack stands, wheel chocks.
Remove the Wheel
- Use a lug wrench to remove the wheel from the affected side.
- Tools Required: Lug wrench.
Examine CV Joint
- Inspect the outer CV joint boot for tears or leaks. If damaged, replace the CV joint.
- If the joint is intact, check for play by moving the axle in and out.
Replace CV Joint (if necessary)
- Remove the axle nut using a socket wrench.
- Disconnect the lower control arm if needed, then pull out the CV axle.
- Install the new CV joint or axle, ensuring it is properly seated.
- Reassemble components in reverse order.

3. Check Wheel Bearings

Inspect Wheel Bearings
- Spin the hub while feeling for roughness or noise.
- If defective, remove the hub assembly.
Replace Wheel Bearings
- Use a bearing puller to remove old bearings.
- Install new wheel bearings and reassemble the hub.
- Tools Required: Bearing puller, torque wrench for reassembly.

4. Examine Suspension Components

Check control arms, bushings, and tie rods for any signs of wear or damage.
Replace any worn components as necessary.

5. Reassemble and Test

Reinstall the wheel and lower the vehicle.
Torque the wheel lug nuts to the manufacturer’s specifications.
Test drive the vehicle to ensure the noise is resolved.