FAULTBASE
Error CodesASKCars
© 2026 FAULTBASE
All rights reserved.
v2.0.0 • Production
ContactPrivacyImpressum
my Honda Accord is making a strange noise when accelerating can it be serious? - Honda Accord
Home/Cars/Honda/Accord/10th Generation (2018-2022)/my Honda Accord is making a strange noise when accelerating can it be serious?

my Honda Accord is making a strange noise when accelerating can it be serious?

Honda Accord 10th Generation (2018-2022)

Error Codes
2-4 hours
Time
medium
Difficulty
medium
Severity
Navigation
ProblemSymptomsDiagnosisSolution
ProblemSymptomsDiagnosisSolution
3 min read
492 words

Problem Statement

Learn how to diagnose and fix strange noise during acceleration in Honda Accord. Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component
Engine
Estimated Time
2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

  • •Disconnect the battery before working on electrical systems
  • •Use jack stands to support the vehicle securely when working underneath

Symptoms

  • •Strange noise when accelerating
  • •Possible loss of power during acceleration
  • •Vibration felt through the steering wheel or floor
  • •Decreased fuel efficiency
  • •Check engine light may illuminate

Diagnostic Steps

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

  • ✓Test the affected component to ensure it functions correctly
  • ✓Check for any error codes or warning lights
  • ✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

  • •Follow the manufacturer's recommended maintenance schedule
  • •Address warning signs early before they develop into major issues
  • •Use quality parts and fluids recommended for your vehicle
  • •Keep detailed records of all repairs and maintenance

Tools & Equipment Required

  • •OBD-II scanner
  • •Socket set
  • •Torque wrench
  • •Jack and jack stands
  • •Wrench set
  • •Exhaust clamp tool

Parts Required

  • •Drive belt(s)
  • •Engine or transmission mount(s)
  • •Exhaust clamps (if needed)

Additional Information

Affected Component
Engine
Estimated Time
2-4 hours
Difficulty
medium
Severity
medium
Tools Required
6 items
Parts Required
3 items

Related Faults

Loading...

Share this solution

Comments

Sign in to share your thoughts

Sign In

No comments yet

Be the first to share your thoughts

Back to Generation
Solution
1. Preparation
  • Gather tools and parts necessary for the inspection and repair.
  • Disconnect the negative battery terminal to ensure safety.
2. Inspect and Replace Drive Belts
  • Tools Required: Socket set, torque wrench.
  • Inspect the drive belts for cracks, fraying, or wear.
  • If the belt appears damaged, loosen the tensioner and remove the old belt.
  • Install the new belt, ensuring proper routing and tension according to the manufacturer's specifications.
  • Tighten the tensioner to the specified torque.
3. Check and Replace Engine or Transmission Mounts
  • Tools Required: Jack and jack stands, socket set.
  • Raise the vehicle and support it securely on jack stands.
  • Inspect engine and transmission mounts for cracks, deterioration, or breakage.
  • If a mount is damaged, remove the bolts securing the mount and replace it with a new one.
  • Tighten the mounting bolts to the manufacturer's specified torque.
4. Inspect and Repair Exhaust System
  • Tools Required: Wrench set, exhaust clamp tool.
  • Inspect the exhaust system for loose brackets or damaged components that may cause noise.
  • Tighten any loose clamps or bolts; replace any damaged sections of the exhaust.
5. Final Assembly
  • Reconnect the negative battery terminal.
  • Start the engine and listen for any remaining noise, ensuring all components are secure.