how to tell if Honda Accord 9th Generation (2013-2017) needs new brakes?

Honda Accord 10th Generation (2018-2022)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

508 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and replace brakes on Honda Accord 9th Generation (2013-2017). Step-by-step guide with symptoms, diagnostic steps, and tools required.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always disconnect the battery before working on electrical components.
•Allow brake components to cool before handling after driving.

Symptoms

•Squeaking or squealing noises when braking
•Grinding sounds during braking
•Vibration or pulsation in the brake pedal
•Warning light illuminated on the dashboard
•Increased stopping distance
•Brake pedal feels soft or spongy

Diagnostic Steps

1
Inspect brake pads visually for wear indicators.
2
Measure brake pad thickness using a caliper or ruler.
3
Check for any signs of brake fluid leaks around the calipers and lines.
4
Test brake performance during a low-speed drive, noting any unusual sounds or behaviors.
5
Examine rotors for scoring, warping, or uneven wear.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Socket set
•C-clamp
•Torque wrench

Parts Required

•Brake pads
•Brake rotors (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads visually for wear indicators.
2
Measure brake pad thickness using a caliper or ruler.
3
Check for any signs of brake fluid leaks around the calipers and lines.
4
Test brake performance during a low-speed drive, noting any unusual sounds or behaviors.
5
Examine rotors for scoring, warping, or uneven wear.

Solution

1. Preparation

Gather tools and parts required for the brake replacement.
Ensure the vehicle is parked on a level surface and the emergency brake is engaged.

2. Remove Wheel

Use a lug wrench to loosen the lug nuts while the vehicle is still on the ground.
Raise the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect Brake Components

Use a socket set to remove the caliper bolts.
Carefully slide the caliper off the rotor without disconnecting the brake line.
Inspect the brake pads for wear; replace if they are less than 3mm thick.
Check the rotor for damage; if warped or excessively worn, it may need resurfacing or replacement.

4. Replace Brake Pads

Remove the old brake pads from the caliper bracket.
Install new brake pads in the caliper bracket, ensuring proper orientation.
Use a C-clamp to compress the caliper piston back into the caliper housing to fit over the new pads.

5. Reassemble Components

Reattach the caliper over the new pads and secure it with caliper bolts, tightening to the manufacturer’s specified torque (usually around 20-25 lb-ft).
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and then torque the lug nuts to the manufacturer’s specifications (usually around 80-100 lb-ft).

6. Test Brakes

Pump the brake pedal several times to ensure proper pressure is established.
Conduct a test drive to confirm that brakes are functioning correctly and listen for any unusual sounds.