how to reset maintenance light on Honda Accord Eleventh Generation (2023-present)

Honda Accord 10th Generation (2018-2022)

Error Codes

10-15 minutes

Time

easy

Difficulty

low

Severity

2 min read

317 words

Problem Statement

Learn how to reset the maintenance light on a 2023 Honda Accord. Step-by-step guide with diagnostic procedures and verification tips.

Affected Component

Electrical

Estimated Time

10-15 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is in 'Park' and on level ground when performing the reset.

Symptoms

•Maintenance light illuminated on the dashboard
•No changes in vehicle performance
•No error codes logged in the OBD-II system

Diagnostic Steps

1
Ensure the vehicle is in the 'Run' position without starting the engine.
2
Check the odometer reading to confirm that maintenance has been completed.
3
Confirm that the vehicle's battery is functioning properly to avoid any electrical issues during the reset.

Solution

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•None

Parts Required

•None

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools: None required for this reset.
Ensure the vehicle is parked in a safe location.

2. Access the Maintenance Light Reset Procedure

Turn the ignition switch to the "Run" position (do not start the engine).
Press the "Home" button on the infotainment display to access the main menu.
Select "Settings" from the menu.

3. Reset the Maintenance Light

Within "Settings," select "Vehicle."
Navigate to "Maintenance Info."
Select "Reset" or "Oil Life" depending on what is displayed and confirm the reset action.
If prompted, confirm the reset by selecting "Yes."

4. Verify the Reset

Turn the ignition off and then back on to check that the maintenance light has turned off.
If the light is still on, repeat the reset procedure.