why does my GMC Sierra T1XX (2019-Present) shakes when I brake at high speeds

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

540 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking during braking in GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always use jack stands when working under a vehicle.
•Ensure the vehicle is securely supported before starting work.

Symptoms

•Steering wheel shakes or vibrates when braking
•Vehicle pulls to one side during braking
•Increased stopping distance
•Brake pedal pulsates or feels uneven
•Noises such as grinding or squeaking when brakes are applied

Diagnostic Steps

1
Inspect brake pads and rotors for wear and damage.
2
Check for warped brake rotors using a dial indicator.
3
Examine brake calipers for proper operation and sticking.
4
Test wheel balance and alignment.
5
Inspect suspension components for wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Lug wrench
•Jack and jack stands
•Socket set
•Torque wrench
•Dial indicator
•Brake cleaner

Parts Required

•Brake pads
•Brake rotors
•Brake caliper hardware (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather tools and required parts.
Park the vehicle on a level surface and engage the parking brake.
Use wheel chocks to prevent the vehicle from rolling.
Disconnect the battery if working on electrical components.

2. Remove Wheel Assembly

Use a lug wrench to loosen the lug nuts slightly.
Lift the vehicle using a jack and secure it with jack stands.
Remove the lug nuts completely and take off the wheel.

3. Inspect and Replace Brake Components

a. Inspect Brake Pads and Rotors

Remove the caliper by unbolting it from its mounting bracket using a socket set.
Carefully slide the caliper off the rotor, supporting it to avoid stressing the brake line.
Inspect the pads for thickness and even wear; replace if below the manufacturer’s specification.
Check the rotor for warping or scoring; if warped, replace the rotor.

b. Replace Brake Rotors (if necessary)

If replacement is needed, unbolt the rotor from the hub.
Clean the hub surface with brake cleaner to ensure proper seating for the new rotor.
Install the new rotor, ensuring it is properly aligned and secured.

4. Reassemble Brake Components

Reinstall the caliper over the new pads and rotor, tightening bolts to the manufacturer's torque specifications.
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle from the jack stands and tighten the lug nuts to the specified torque.

5. Final Checks

Reconnect the battery if it was disconnected.
Pump the brake pedal to ensure proper brake pressure is restored.
Test the vehicle at a low speed before attempting high-speed braking.