why does my GMC Sierra T1XX (2019-Present) shake when braking

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

451 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix shaking when braking in GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always ensure the vehicle is securely supported on jack stands before working underneath.
•Allow brakes to cool before inspecting or working on them.

Symptoms

•Steering wheel shakes during braking
•Vibration felt in the brake pedal
•Uneven wear on brake pads or rotors
•Increased stopping distance
•Noise from the brake system (squeaking or grinding)

Diagnostic Steps

1
Inspect front brake rotors for warping using a dial indicator.
2
Check brake pads for uneven wear or damage.
3
Examine suspension components (ball joints, tie rods, control arms) for wear or play.
4
Verify proper wheel torque on lug nuts.
5
Inspect tires for uneven wear or damage.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Socket set
•Dial indicator
•Micrometer
•Brake pad spreader

Parts Required

•Brake pads
•Brake rotors (if warped)
•Brake fluid (if needed)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Wear safety goggles and gloves.

2. Lift the Vehicle

Use a jack to lift the front of the vehicle.
Secure with jack stands to ensure safety.

3. Remove Wheel

Using a socket set, remove the lug nuts and take off the front wheel to access the brakes.
Tools Required: Socket set, lug wrench.

4. Inspect and Replace Brake Components

a. Check Brake Rotors

Measure rotor thickness with a micrometer; if below specifications or warped, replace.
Tools Required: Dial indicator, micrometer.

b. Replace Brake Pads

Remove caliper bolts with a socket set.
Carefully lift the caliper off the rotor and support it to avoid straining the brake line.
Remove old brake pads and install new ones.
Tools Required: Socket set, brake pad spreader.

5. Reinstall Components

Reattach the caliper and torque bolts to manufacturer specifications.
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to the specified value (typically 80-100 ft-lbs).

6. Test Drive

Conduct a test drive to ensure the vibration issue is resolved.