why does my GMC Sierra T1XX (2019-Present) key fob not work?

GMC Sierra T1XX (2019-Present)

Error Codes

30 minutes to 1 hour

Time

medium

Difficulty

high

Severity

3 min read

429 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix key fob issues for GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and solutions.

Affected Component

Electrical

Estimated Time

30 minutes to 1 hour

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the vehicle's battery if performing extensive electronic work.

Symptoms

•Key fob buttons are unresponsive
•Vehicle does not respond to key fob signals
•Key fob LED indicator does not illuminate when pressed
•Engine does not start when key fob is present
•"Key Not Detected" message displayed on the dashboard

Diagnostic Steps

1
Inspect the key fob battery for corrosion or damage.
2
Replace the battery in the key fob and test for functionality.
3
Check for interference from other electronic devices or proximity to metal objects.
4
Use an OBD-II scanner to check for any key fob-related error codes.
5
Verify the vehicle’s keyless entry system and antenna are functioning properly.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Small flathead screwdriver
•OBD-II scanner

Parts Required

•CR2032 battery (new)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the key fob battery for corrosion or damage.
2
Replace the battery in the key fob and test for functionality.
3
Check for interference from other electronic devices or proximity to metal objects.
4
Use an OBD-II scanner to check for any key fob-related error codes.
5
Verify the vehicle’s keyless entry system and antenna are functioning properly.

Solution

1. Preparation

Gather necessary tools: small flathead screwdriver, replacement battery (CR2032), OBD-II scanner.
Ensure the vehicle is in a safe location and the engine is off.

2. Open the Key Fob

Use the small flathead screwdriver to gently pry open the key fob along the seam.
Carefully separate the two halves without damaging the casing.

3. Replace the Battery

Remove the old battery, taking note of the orientation (positive side facing up).
Insert the new CR2032 battery in the correct orientation.
Ensure the battery is seated properly.

4. Reassemble the Key Fob

Align the two halves of the key fob.
Press them together firmly until they click back into place.
Test the key fob by pressing the buttons to ensure the LED illuminates.

5. Reprogram the Key Fob (if necessary)

If the key fob still does not work after battery replacement, use the OBD-II scanner to reset or reprogram it according to the vehicle's service manual.
Follow the programming instructions specific to the GMC Sierra T1XX.