what causes my GMC Sierra T1XX (2019-Present) to shake while braking?

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

511 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Discover the causes and solutions for braking vibrations in GMC Sierra T1XX (2019-Present). Step-by-step guide for diagnosis and repair.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Always allow the vehicle to cool before working on the brakes.
•Use proper safety gear, including gloves and safety glasses, when performing repairs.

Symptoms

•Steering wheel shakes during braking
•Vibration felt in the brake pedal
•Uneven wear on brake pads or rotors
•Noise such as grinding or squeaking when braking
•Vehicle pulls to one side during braking
•Increased stopping distance

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for wear and ensure they are properly installed.
3
Examine suspension components such as control arms, bushings, and tie rods for play or damage.
4
Verify wheel alignment and balance using an alignment machine.
5
Inspect wheel bearings for any signs of wear or damage.
6
Scan for any ABS-related trouble codes using an OBD-II scanner.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Micrometer
•Alignment machine

Parts Required

•Brake rotors
•Brake pads
•Suspension components

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pads for wear and ensure they are properly installed.
3
Examine suspension components such as control arms, bushings, and tie rods for play or damage.
4
Verify wheel alignment and balance using an alignment machine.
5
Inspect wheel bearings for any signs of wear or damage.
6
Scan for any ABS-related trouble codes using an OBD-II scanner.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Park the vehicle on a flat surface, engage the parking brake, and disconnect the battery.

2. Inspect and Replace Brake Rotors

Sub-steps:
1. Remove the wheel using a socket set.
2. Remove the caliper by unbolting it from the bracket and secure it to avoid stress on the brake line.
3. Remove the brake pads from the caliper bracket.
4. Measure rotor thickness with a micrometer; replace if below the minimum specification or if warped.
5. Remove the rotor by unbolting it from the hub.
6. Install the new rotor, ensuring it is properly seated.
7. Reinstall the brake pads and caliper, torquing bolts to manufacturer specifications (typically around 25-35 ft-lbs).

3. Inspect and Replace Suspension Components

Sub-steps:
1. Use a jack to lift the vehicle and secure it on jack stands.
2. Visually inspect control arms, bushings, and tie rods for signs of wear or damage.
3. If any component is worn, remove it using a socket set and replace it with new parts.
4. Ensure all bolts are torqued to the manufacturer's specifications.

4. Wheel Alignment and Balancing

Sub-steps:
1. Take the vehicle to a professional alignment shop.
2. Verify that the alignment is within manufacturer specifications.
3. Balance the wheels if necessary.