what causes my GMC Sierra T1XX (2019-Present) to shake when I brake?

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

3 min read

485 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking shake in GMC Sierra T1XX (2019-Present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Allow the brakes to cool before working on them.
•Always use jack stands when working under the vehicle.

Symptoms

•Steering wheel shakes or vibrates when braking
•Vehicle pulls to one side during braking
•Abnormal noise from the brakes (squeaking or grinding)
•Vibration felt in the brake pedal
•Brake pads or rotors have uneven wear

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pad thickness to ensure they are not excessively worn.
3
Examine suspension components (control arms, tie rods) for wear or damage.
4
Inspect wheel bearings for play or damage.
5
Perform a visual inspection of the brake calipers for sticking or malfunction.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Socket set
•Torque wrench
•Brake caliper tool
•Jack and jack stands

Parts Required

•Brake rotors (if warped)
•Brake pads (if worn)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake rotors for warping or uneven wear using a dial indicator.
2
Check brake pad thickness to ensure they are not excessively worn.
3
Examine suspension components (control arms, tie rods) for wear or damage.
4
Inspect wheel bearings for play or damage.
5
Perform a visual inspection of the brake calipers for sticking or malfunction.

Solution

1. Preparation

Gather tools and components.
Park the vehicle on a level surface and engage the parking brake.
Disconnect the battery to prevent any electrical issues.

2. Remove Wheel

Use a jack to lift the vehicle and secure it with jack stands.
Remove the lug nuts using a socket set and take off the wheel.

3. Inspect and Replace Brake Rotors

Check rotor thickness and surface condition.
If warped, remove the caliper by unscrewing the caliper bolts.
Hang the caliper with a bungee cord to avoid stress on the brake line.
Remove the rotor by unscrewing the retaining screws (if equipped).
Install new rotors, ensuring they are properly seated.
Torque the rotor screws to manufacturer specifications.

4. Replace Brake Pads

Remove the old brake pads from the caliper bracket.
Compress the caliper piston using a brake caliper tool.
Install new brake pads, ensuring they fit securely in the bracket.
Reattach the caliper over the new pads and torque the caliper bolts to specifications.

5. Reassemble and Test

Reattach the wheel and hand-tighten the lug nuts.
Lower the vehicle and torque the lug nuts to manufacturer specifications.
Reconnect the battery and perform a test drive to check for vibrations.