my GMC Sierra T1XX (2019-Present) remote start not working, why is that

GMC Sierra T1XX (2019-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

high

Severity

3 min read

540 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix remote start issues in GMC Sierra T1XX (2019-present). Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Ensure the vehicle is in "Park" before attempting remote start repairs.

Symptoms

•Remote start button does not engage the engine
•"Remote Start Disabled" message on the dashboard
•No response from the vehicle when the remote start is attempted
•Check engine light illuminated
•Vehicle does not start with the key fob or traditional method

Diagnostic Steps

1
Check the battery voltage of the key fob to ensure it is functioning properly.
2
Scan the vehicle's computer system for any error codes related to the remote start function.
3
Verify that all doors, the hood, and the trunk are closed securely, as remote start will not function if any are open.
4
Inspect the vehicle's security system for any faults or issues that may disable remote start.
5
Ensure the vehicle is in "Park" and not in gear, as this is a requirement for remote starting.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Small flat-head screwdriver

Parts Required

•Key fob battery (CR2032)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the battery voltage of the key fob to ensure it is functioning properly.
2
Scan the vehicle's computer system for any error codes related to the remote start function.
3
Verify that all doors, the hood, and the trunk are closed securely, as remote start will not function if any are open.
4
Inspect the vehicle's security system for any faults or issues that may disable remote start.
5
Ensure the vehicle is in "Park" and not in gear, as this is a requirement for remote starting.

Solution

1. Preparation

Gather tools and parts needed for the repair.
Ensure the vehicle is parked on a flat surface and the ignition is off.
Disconnect the negative battery terminal for safety.

2. Key Fob Battery Replacement

Tools Required: Small flat-head screwdriver, new key fob battery (typically CR2032).
Carefully pry open the key fob using the flat-head screwdriver.
Remove the old battery and replace it with the new battery, ensuring correct polarity.
Reassemble the key fob and test the remote start feature.

3. Check Security System

Tools Required: OBD-II scanner.
Reconnect the negative battery terminal.
Turn the ignition to the "On" position without starting the engine.
Use the OBD-II scanner to check for any security-related fault codes.
If codes are present, note them for further troubleshooting or repair.

4. Inspect Remote Start System

Tools Required: Multimeter, wiring diagram for remote start system.
Locate the remote start module, typically under the dashboard or in the engine compartment.
With the multimeter, check for power and ground at the remote start module.
Inspect all connections and wiring for damage or corrosion.

5. Reprogram Key Fob (if necessary)

Tools Required: GMC dealer tool or compatible programming tool.
If the key fob is not recognized, it may need to be reprogrammed.
Follow the manufacturer's instructions for key fob programming, which may require connecting to the vehicle's diagnostic port.