my GMC Sierra T1XX (2019-Present) rearview camera not working how to repair

GMC Sierra T1XX (2019-Present)

Error Codes

1-2 hours

Time

medium

Difficulty

medium

Severity

3 min read

501 words

Problem Statement

Learn how to diagnose and fix the rearview camera issue in your GMC Sierra T1XX. Step-by-step guide with symptoms, diagnostic steps, and repair instructions.

Affected Component

Electrical

Estimated Time

1-2 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect the battery before working on electrical systems to avoid short circuits.

Symptoms

•Rearview camera display is black or blank
•"Camera System Unavailable" message on the infotainment screen
•Image is distorted or flickering
•No response when engaging reverse gear
•Check camera system warning light illuminated on the dashboard

Diagnostic Steps

1
Inspect the camera lens for any physical obstructions or damage.
2
Check the vehicle’s fuse box for any blown fuses related to the rearview camera system.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Verify the wiring connections at the rearview camera and the head unit for any signs of damage or disconnection.
5
Test the camera voltage using a multimeter to ensure it is receiving power.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Screwdriver set
•Fuse puller
•Electrical tape

Parts Required

•Rearview camera (if faulty)
•Replacement fuse (if blown)
•Wiring harness (if damaged)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect the camera lens for any physical obstructions or damage.
2
Check the vehicle’s fuse box for any blown fuses related to the rearview camera system.
3
Use an OBD-II scanner to check for any error codes related to the camera system.
4
Verify the wiring connections at the rearview camera and the head unit for any signs of damage or disconnection.
5
Test the camera voltage using a multimeter to ensure it is receiving power.

Solution

1. Preparation

Gather necessary tools and parts.
Disconnect the battery to ensure safety while working on electrical components.

2. Inspect and Clean the Camera

Locate the rearview camera mounted on the tailgate or bumper.
Carefully clean the camera lens with a soft cloth to remove dirt or debris.
If the lens is cracked or damaged, proceed to replace the camera.

3. Check and Replace Fuses

Open the vehicle’s fuse box and locate the fuse associated with the rearview camera.
Remove the fuse using a fuse puller, inspect it for damage, and replace it if blown with the same amperage rating.

4. Repair or Replace Wiring Connections

Inspect the wiring harness leading to the rearview camera for any signs of fraying or damage.
If damaged, repair the wiring with electrical tape or replace the wiring harness as necessary.
Ensure all connectors are secure and properly seated.

5. Reinstall the Camera (if replaced)

If the camera was found to be faulty, remove the old camera by unscrewing it from its mount.
Install the new camera, ensuring it is securely fastened and the wiring is correctly connected.

6. Reconnect Battery and Test

Reconnect the vehicle’s battery.
Start the vehicle and engage reverse to test the functionality of the rearview camera.