my GMC Sierra T1XX (2019-Present) is shaking when I brake, what can I do?

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

high

Severity

2 min read

396 words

⚠️ Safety Warning

This issue requires immediate attention. If you are not experienced with automotive repairs, consult a professional mechanic. Working on critical systems can be dangerous.

Problem Statement

Learn how to diagnose and fix braking vibration issues in GMC Sierra T1XX (2019-Present). Step-by-step guide with diagnostic procedures and repair instructions.

Affected Component

Brakes

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely supported on jack stands before working underneath it.
•Use appropriate personal protective equipment (gloves and safety glasses) when handling brake components.

Symptoms

•Shaking or vibrating sensation in the steering wheel during braking
•Uneven wear on brake pads
•Increased stopping distance
•Possible pulling to one side when braking
•Noise (grinding or squealing) during braking

Diagnostic Steps

1
Inspect brake pads and rotors for uneven wear or damage.
2
Check for warped brake rotors using a dial indicator or runout gauge.
3
Examine suspension components for wear or damage (e.g., control arms, bushings).
4
Inspect wheel bearings for play or excessive wear.
5
Verify tire condition and balance to rule out related issues.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•Jack and jack stands
•Lug wrench
•Socket set
•Torque wrench
•Dial indicator or runout gauge

Parts Required

•Brake pads (if replacement is necessary)
•Brake rotors (if replacement is necessary)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Inspect brake pads and rotors for uneven wear or damage.
2
Check for warped brake rotors using a dial indicator or runout gauge.
3
Examine suspension components for wear or damage (e.g., control arms, bushings).
4
Inspect wheel bearings for play or excessive wear.
5
Verify tire condition and balance to rule out related issues.

Solution

1. Preparation

Gather necessary tools and parts.
Park the vehicle on a level surface and engage the parking brake.
Use wheel chocks to prevent movement.

2. Remove Wheel

Loosen lug nuts slightly while the wheel is still on the ground.
Lift the vehicle using a jack and secure it on jack stands.
Fully remove the lug nuts and take off the wheel.

3. Inspect Brake Components

Brake Pads:
- Remove the caliper by unbolting it with a socket wrench.
- Inspect brake pads for thickness; replace if worn below manufacturer's specification.
Brake Rotors:
- Check the brake rotors for warping using a dial indicator. If warped, replace rotors.
- If not warped but worn, consider resurfacing them if within specifications.

4. Reassemble

Reinstall brake caliper and ensure bolts are torqued to manufacturer specifications (typically 20-30 ft-lbs).
Reinstall the wheel and hand-tighten the lug nuts.
Lower the vehicle to the ground and torque the lug nuts to the specified value (typically 100-140 ft-lbs).

5. Test Drive

Start the vehicle and perform a test drive to ensure proper braking function without vibration.

Tools Required:

Jack and jack stands
Lug wrench
Socket set
Torque wrench
Dial indicator or runout gauge

Parts Required:

Brake pads (if replacement is necessary)
Brake rotors (if replacement is necessary)

Estimated Repair Time: 2-4 hours

Safety Warnings:

Ensure the vehicle is securely supported on jack stands before working underneath it.
Use appropriate personal protective equipment (gloves and safety glasses) when handling brake components.