how to troubleshoot GMC Sierra T1XX (2019-Present) traction control light?

GMC Sierra T1XX (2019-Present)

Error Codes

2-4 hours

Time

medium

Difficulty

medium

Severity

4 min read

602 words

Problem Statement

Learn how to troubleshoot and fix the traction control light issue in GMC Sierra T1XX (2019-Present). Step-by-step guide with diagnostic steps and solutions.

Affected Component

Electrical

Estimated Time

2-4 hours

⚠️ Safety Warnings

Important safety information - read before proceeding

•Disconnect battery before working on electrical systems.
•Allow vehicle to cool before inspecting components around the brakes.

Symptoms

•Traction control light is illuminated on the dashboard.
•Reduced engine power or acceleration.
•Unusual or inconsistent tire slippage during acceleration.
•Vehicle stability control may activate unexpectedly.
•Check engine light may also be illuminated.

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes related to the traction control system.
2
Inspect the wheel speed sensors for damage, dirt, or corrosion.
3
Check the condition of the ABS module and wiring for any signs of wear or short circuits.
4
Verify the functionality of the brake system, ensuring proper brake fluid level and no leaks.
5
Test the operation of the traction control switch to ensure it is functioning correctly.
6
Inspect the vehicle’s tires for proper inflation and wear, as mismatched tires can affect traction control.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner
•Multimeter
•Socket set
•Torque wrench
•Cleaning cloth

Parts Required

•Wheel speed sensor (if replacement is necessary)
•Traction control switch (if replacement is necessary)
•Brake fluid (DOT 3 or DOT 4)

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Scan for error codes using an OBD-II scanner to identify any stored trouble codes related to the traction control system.
2
Inspect the wheel speed sensors for damage, dirt, or corrosion.
3
Check the condition of the ABS module and wiring for any signs of wear or short circuits.
4
Verify the functionality of the brake system, ensuring proper brake fluid level and no leaks.
5
Test the operation of the traction control switch to ensure it is functioning correctly.
6
Inspect the vehicle’s tires for proper inflation and wear, as mismatched tires can affect traction control.

Solution

1. Preparation

Gather necessary tools and parts.
Ensure the vehicle is parked on a level surface and the ignition is turned off.
Disconnect the battery to prevent electrical shorts while working on the system.

2. Inspect and Clean Wheel Speed Sensors

Locate the wheel speed sensors at each wheel hub.
Remove any dirt and debris around the sensors using a clean cloth.
Disconnect the electrical connector from each sensor.
Use a multimeter to measure the resistance of the sensor. Replace if out of specification.

3. Check ABS Module and Wiring

Visually inspect the ABS module for any signs of physical damage.
Check the wiring harness connected to the ABS module for frays or breaks.
Use a multimeter to test continuity in the wiring. Repair or replace as needed.

4. Test Traction Control Switch

Locate the traction control switch on the dashboard.
Disconnect the switch connector and use a multimeter to check for continuity when the switch is pressed.
Replace the switch if it fails the continuity test.

5. Brake System Inspection

Check the brake fluid level in the reservoir; top off if necessary using the recommended brake fluid type (DOT 3 or DOT 4).
Inspect brake lines for leaks or damage.
Ensure all brake components are in good working order.

6. Reconnect Battery and Reset System

Reconnect the battery terminals securely.
Use the OBD-II scanner to clear any stored trouble codes related to the traction control system.
Start the vehicle and check if the traction control light remains off.