how to reset the transmission fluid light on GMC Sierra T1XX (2019-Present)

GMC Sierra T1XX (2019-Present)

Error Codes

15-30 minutes

Time

medium

Difficulty

medium

Severity

3 min read

484 words

Problem Statement

Learn how to reset the transmission fluid light on GMC Sierra T1XX (2019-present). Step-by-step guide with diagnostic steps and tools required.

Affected Component

Transmission

Estimated Time

15-30 minutes

⚠️ Safety Warnings

Important safety information - read before proceeding

•Ensure the vehicle is securely parked and the engine is off before performing manual reset procedures.

Symptoms

•Transmission fluid light remains illuminated
•Possible warning message on the dashboard
•Changes in transmission performance (if fluid is low or dirty)
•No immediate physical symptoms if the fluid is adequately maintained

Diagnostic Steps

1
Check the owner’s manual for specific reset instructions related to the transmission fluid light.
2
Confirm that the transmission fluid level is correct and the fluid is in good condition.
3
Use an OBD-II scanner to check for any related diagnostic trouble codes (DTCs).
4
Ensure the vehicle is in park or neutral before attempting to reset the light.
5
Verify that the transmission fluid change or service has been performed, if applicable.

Solution

💡 Expert Tip

For complex repairs like this, consider taking photos at each step. This helps if you need to reverse a step or consult with a mechanic. Also, keep all removed parts organized - you may need to reference them during reassembly.

Verification

After completing the repair, verify that the issue has been resolved:

✓Test the affected component to ensure it functions correctly
✓Check for any error codes or warning lights
✓Monitor the vehicle for a few days to ensure the issue does not recur

Prevention Tips

To prevent this issue from occurring again:

•Follow the manufacturer's recommended maintenance schedule
•Address warning signs early before they develop into major issues
•Use quality parts and fluids recommended for your vehicle
•Keep detailed records of all repairs and maintenance

Tools & Equipment Required

•OBD-II scanner

Parts Required

•None for the reset process, but consider transmission fluid if maintenance is required.

Related Faults

Share this solution

Comments

No comments yet

Be the first to share your thoughts

Back to Generation

Diagnostic Steps

1
Check the owner’s manual for specific reset instructions related to the transmission fluid light.
2
Confirm that the transmission fluid level is correct and the fluid is in good condition.
3
Use an OBD-II scanner to check for any related diagnostic trouble codes (DTCs).
4
Ensure the vehicle is in park or neutral before attempting to reset the light.
5
Verify that the transmission fluid change or service has been performed, if applicable.

Solution

1. Preparation

Gather necessary tools: OBD-II scanner (if needed) and vehicle owner's manual.
Ensure the vehicle is parked on a level surface with the engine running or turned off, depending on your method of reset.

2. Reset Using the OBD-II Scanner

Connect the OBD-II Scanner:
- Locate the OBD-II port (usually under the dashboard near the driver's side).
- Plug in the scanner and turn the ignition key to the “On” position without starting the engine.
Select the Vehicle Model:
- Follow the scanner instructions to select the specific model (GMC Sierra 2019-present).
Access Transmission Light Reset Function:
- Navigate to the appropriate menu for resetting transmission or service lights.
Perform the Reset:
- Choose the option to reset the transmission fluid light and confirm the action.
Disconnect the Scanner:
- Once the reset is complete, disconnect the OBD-II scanner.

3. Manual Reset (if applicable)

Turn the Ignition On:
- Without starting the engine, turn the ignition key to the “On” position.
Press the Gas Pedal:
- Fully press the gas pedal three times within 5 seconds.
Turn Off the Ignition:
- Turn the ignition off, then turn it back on to check if the light has reset.